The PID330 is a sophisticated auto-tuning PID controller housed in a 96mm x 96mm 1//4 DIN case. It has selectable thermocouple, RTD or analogue inputs. Relay or SSR plus relay output versions are available. ,It has a large dual 4 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270Vac or 24Vac/dc.
Dual display of set point and process value On demand autotuning of PID parameters Programmable thermocouple, PT100, mV, 0-10V or 0-20mA inputs 1 or 2 on/off or PID control outputs Sensor break detection & error compensation Sensor range: J -200 to 750ºC; K -200 to 1350ºC; T -200 to 400ºC; R 0 to 1750ºC; S 0 to 1750ºC; C 0 to 2300ºC; E -200 to 750ºC; B 149 to 1820ºC; N -200 to 1300ºC; L -200 to 900ºC; U -200 to 400ºC; W 0 to 2300ºC; Platinel II 0 to 1390ºC; PT100 -100 to 850ºC Ambient temperature range: 0 to 50°C, 85% RH non-condensing Resolution: 1//0.1ºC for thermocouples/RTDs; 1//0.1/0.01/0.001 for analogue I/P Dimensions: H96 x W96 x D84.5mm Weight: 270g
Attribute
Value
Output Type
Relay
Supply Voltage
24 V ac/dc
Size
96 x 96 (1/4 DIN)mm
Number of Outputs
2
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Temperature Range
+149 → +1820 (Type B Thermocouple) °C, 0 → +1390 (PL2 Type) °C, 0 → +1750 (Type R & S Thermocouples) °C, 0 → +2300 (Type C & W Thermocouples) °C, -100 → +850 (PT100) °C, -200 → +1300 (Type N Thermocouple) °C, -200 → +1350 (Type K Thermocouple) °C, -200 → +400 (Type U & T Thermocouples) °C, -200 → +750 (Type E & J Thermocouples) °C, -200 → +900 (Type L Thermocouple) °C