Recently searched

    STMicroelectronics Nucleo Pack Motor Controller

    RS Stock No.:
    Mfr. Part No.:
    View this category
    Discontinued product
    RS Stock No.:
    Mfr. Part No.:

    Technical data sheets

    Legislation and Compliance

    Product Details

    P-NUCLEO-IHM001 BLDC Motor Control Development Kit

    The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection.
    The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs.
    The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe.
    The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier.
    The Arduino connectivity support and ST Morpho headers make it easy to expand.
    An external power supply 8 V to 12 V, is required to power the kit.

    X-NUCLEO-IHM07M1 features

    3 phase driver board for BLDC/PMSM motors based on L6230
    Nominal operating voltage range from 8 V to 48 V dc
    2.8 A output peak current (1.4 A root mean square)
    Non-dissipative overcurrent detection and protection
    Full compatible with ST 6-step or ST-FOC-control algorithm
    Full support for sensorless and sensor mode
    3-Shunt and 1-Shunt configurable jumpers for motor current sensing
    Hall encoder motor sensor connector and circuit
    Potentiometer available for speed regulation
    Compatible with STM32 Nucleo boards
    Equipped with ST Morpho connectors

    NUCLEO-F302R8 features

    STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM
    Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os
    Mbed-enabled (
    On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
    Two push buttons: "User" and "Reset"

    3 phase motor

    Bull-Running model BR2804-1700 kV
    Nominal voltage 11.1 V dc (battery up to 3 S)
    Maximum DC current: 5 A
    Seven pole pairs

    STM32F3 Series 32-Bit ARM® Cortex®-M4 Microcontrollers, STMicroelectronics

    The STM32 F3 series of mixed-signal MCUs with DSP and FPU instructions combines a 32-bit ARM Cortex-M4 core running at 72MHz with an advanced analogue peripheral set.

    Fast comparators (50ns)
    Programmable gain amplifiers (4 gain ranges)
    12-Bit DACs
    Fast 12-Bit ADCs (5 MSPS per channel with up to 18MSPS in interleaved mode)
    16-Bit sigma-delta ADCs
    Fast 144MHz motor control timers, timing resolution better 7ns


    Power Management FunctionMotor Controller
    Kit ClassificationDevelopment Kit
    Kit NameNucleo Pack
    Discontinued product