Better World

Schneider Electric Preventa XPS XPS CM Light Beam/Curtain Safety Relay, 24V dc, 2 Safety Contacts

RS Stock No.:: 477-8684
Mfr. Part No.:: XPSCM1144
Manufacturer:: Schneider Electric

Schneider Electric Preventa XPS XPS CM Light Beam/Curtain Safety Relay, 24V dc, 2 Safety Contacts

Subtotal (1 unit)**

€438.73

(exc. VAT)

€539.64

(inc. VAT)

1 Within 2 working day(s) (EU stock)*

2 Within 2 working day(s) (EU stock)

* Delivery dates may change based on your chosen quantity and delivery address.

Units	Per unit
1 +	€438.73

**price indicative

Better World

Our Better World range features products that make it easy for you to make a greener product choice you can trust. Click here to find out more.

RS Stock No.:: 477-8684
Mfr. Part No.:: XPSCM1144
Manufacturer:: Schneider Electric

XPSCM1144 Schneider Electric Telemecanique Safety Relay Module Safety Light Curtains XUSL.

From Schneider Electric we offer you the Preventa XPS range of Safety relays (safety modules) providing the solution and answer to monitoring safety relay functions. The relays include redundancy principle micro-pressor technology providing you with advanced functionality. There are various safety relay models to choose from, including removeable terminal block versions, allowing easy selection of a module to monitor a safety functions.

Features.

Emergency stop and switches

Coded magnetic switches

Enabling switch

Sensing mats and edges

Two-hand control

Light curtains

Zero speed

Time delay

Lifts

Other applications on hydraulic and eccentric presses.

The safety relays are suitable for all applications with hazards and protect machines and operators.

These safety modules can be used in conjunction with the Harmony XY2SB range of two-hand control stations

What Safety Relay should I use with a Two Hand Control Station?

Safety modules XPS BA, BC and BF may be used for two-hand control stations in order to comply with the requirements of European standard EN 574/ISO 13851 for two-hand control systems.

XPSCM1144 Features and Benefits.

Telemecanique safety module XPSCM.

For monitoring Single Beam photo electric sensor.

Built-in muting.

Inputs – 2 x terminals MA, MB for muting function, 4 x terminals Z1, Z2, Z3, Z4 – for the sensor.

Input voltage of 24 V dc (sensor), 24 V dc (muting) terminals U+, U-.

Input capacity - XC limit switch for muting function, XU2M18PP340 for muting function, XU2S18PP340 (infrared) for sensor, XU9M18PP340 for muting function.

Captive screw clamp terminals.

2 NO output, volt free (13-14, 23-24).

Rated supply voltage 24 V dc.

Sensor power supply U+, U- / 24 V dc.

Sensor supply current 200 MA.

Maximum muting duration of 60 s (-10 – 30%).

Line resistance 10 Ohm for sensor power supply (maximum).

Output current 10 MA (relay).

Output voltage 17 V (relay) minimum.

25 Ms response time (maximum) on input open.

LEDs - 1 LED, function electronic internal fuse status, 1 LED, function restarting, 1 LED, function safety outputs closed, 1 LED, function safety outputs open, 1 incandescent lamp, function muting power consumption: 4 - 6.5 W.

15 W Maximum power consumption.

Electronic internal fuse.

IP Protection.

IP20 (terminals) conforming to IEC 60529.

IP40 (enclosure) conforming to IEC 60529.

Safety.

Can reach category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1.

Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061.

Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

Safety Reliability.

MTTFd = 16.6 years conforming to EN/ISO 13849-1.

DC = 95.5 % conforming to EN/ISO 13849-1.

PFH = 3.12E-7 1/h conforming to EN/IEC 61508.

PFHd = 3.12E-7 1/h conforming to EN/IEC 62061.

Note

This product is supplied with a full installation instruction manual which should be strictly adhered to. Particular attention should be given to section 3.5 (installation positioning and electrical inter-phasing).

Schneider Electric XPS CM Series Safety Relay, 99mm Length, 4 Contacts - XPSCM1144

This safety relay is intended to improve safety in industrial applications by monitoring single beam photoelectric sensors. It is crucial for scenarios where safety and reliability are essential, helping to prevent accidents and maintain compliance with safety regulations. The device features advanced capabilities that enable users to create strong safety systems in accordance with various standards, including ISO 13849-1.

Features & Benefits

• Meets ISO 13849-1 Category 2 for improved safety
• Includes built-in muting for enhanced operational efficiency
• MTTFd of 16.6 years, ensuring long-term dependability
• Supports 4 auxiliary contacts for flexible connections
• High safety integrity with a DC of 95.5%
• Rated insulation voltage of 300V for increased protection

Applications

• Monitoring safety light curtains in automation systems
• Suitable for requiring light beam safety detection
• Applicable in environments needing compliance with SIL 1 standards
• Used in industrial settings for critical safety functions

What type of sensors are compatible with this device?

This safety relay is compatible with various sensors, including infrared sensors for safe monitoring and muting operations.

What power supply is required for operation?

It requires a 24V DC power supply, ensuring compatibility with standard industrial electrical systems.

How can I ensure proper installation?

Correct wiring must be followed as per the outlined specifications, ensuring that all connections meet safety standards.

What is the maximum allowable duration for muting operations?

The muting function can last up to 60 seconds, providing flexibility during operation while maintaining safety.

How does this device signal operational status?

It is equipped with multiple LEDs indicating fuse status, restart functions, and the state of safety outputs to inform users of its operational status.

Single Beam Safety Device

Attribute	Value
Supply Voltage	24V dc
Safety Contacts	2
Function	Light Beam/Curtain
Auxiliary Contacts	4
Range	Preventa XPS
Safety Category ISO 13849-1	2
PL ISO 13849-1	c
SIL IEC 61508	1
Terminal Type	Screw
Width	45mm
Depth	114mm
Series	XPS CM
Better World Verification	Green Premium
Better World Product	Yes
Performance Level	c
Length	99mm

Schneider Electric Preventa XPS XPS CM Light Beam/Curtain Safety Relay, 24V dc, 2 Safety Contacts

Better World

XPSCM1144 Schneider Electric Telemecanique Safety Relay Module Safety Light Curtains XUSL.

Features.

What Safety Relay should I use with a Two Hand Control Station?

XPSCM1144 Features and Benefits.

IP Protection.

Safety.

Safety Reliability.

Note

Schneider Electric XPS CM Series Safety Relay, 99mm Length, 4 Contacts - XPSCM1144

Features & Benefits

Applications

What type of sensors are compatible with this device?

What power supply is required for operation?

How can I ensure proper installation?

What is the maximum allowable duration for muting operations?

How does this device signal operational status?

Related links