Geckodrive G203V Stepper Motor Controller 7 A, 18 → 80V dc, 2.5 x 0.83 x 2.58in

  • RS Stock No. 793-4121
  • Mfr. Part No. G203V
  • Manufacturer Geckodrive
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

G203V - Stepper Drive

The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature protection, reversed power supply polarity protection and will survive accidental motor disconnects while powered-up. The “V” in G203V stands for “Vampire” as it is an unkillable drive.
The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all.

STEP, DIRECTION and DISABLE inputs are opto-isolated
These inputs are +2.5/3.3/5 VDC compatible
Direction is clocked in on the active step pulse edge
Needs heatsinking for current settings greater than 3 amps
LED-status indicators
Power supply voltage between 15 and 80 VDC

Specifications
Attribute Value
For Motor Type Stepper Motor
Current Rating 7 A
Voltage Rating 80 V dc
Board Supply Voltage 18 → 80V dc
Overall Length 2.5in
Overall Width 0.83in
Overall Depth 2.58in
10 In stock for delivery within 2 working days
Unit of sale: Each
249.58
(exc. VAT)
306.98
(inc. VAT)
units
Per unit
1 +
€249.58
Related Products
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features: Pulse and directionCW/CCW pulseA/B quadrature Analogue velocity (oscillator) mode Host commands (SCL compatible)Si Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features: Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature Host control mode Idle current reduction Anti-resonance Torque ripple smoothing ...
Drives motors up to 40V at 35AAdjustable drive ...
Description:
Drives motors up to 40V at 35AAdjustable drive current settings from 0.5 to 3.5AOutput overload protection Synchronisation output for multi-axis systems Full and half step drive modesTTL & CMOS compatible control interface Output disable input5 & 12Vdc auxiliary outputs for ...
Sanyo Denki Sanmotion driver provides the user with ...
Description:
Sanyo Denki Sanmotion driver provides the user with a simple to run driver with a comprehesive amount of applications Available in Bipolar (829-3553) & Unipolar (829-3556) options Can be set to various preset values for quick installation Low vibration mode ...