Applied Motion Systems STR-2M Stepper Motor Controller 0.3 → 2.2 A, 92.6 x 56 x 20.8mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

STR - Stepper Drive

STR - High Performance Stepper Drive.
Easy Drive Configuration, on-board DIP switches are used to configure running current, idle current, load inertia ratio and step resolution.


STR Stepper Drive
Dual H-bridge, 4 quadrant
4 state PWM at 16 kHz
Switch Selectable Parameters
Anti-Resonance
Microstepping
Microstep Emulation
Self Test
Simple Setup, no software required

Specifications
Attribute Value
For Motor Type Bipolar
Current Rating 0.3 → 2.2 A
Voltage Rating 12 → 48 V dc
Overall Length 92.6mm
Overall Width 56mm
Overall Depth 20.8mm
Stock check temporarily unavailable - call for stock availability
Unit of sale: Each
202.49
(exc. VAT)
245.01
(inc. VAT)
units
Per unit
1 +
€202.49
Related Products
Professional range of Connection Modules & Communication Interface ...
Description:
Professional range of Connection Modules & Communication Interface for LEXIUM32I Series with STO (Safe Torque Off) Integrated safety Function Options available for CANopen / CANmotion & EtherCAT Bus Connection Module & Communication Interface via industrial connectors Supports M8 & M12 ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features: Pulse and directionCW/CCW pulseA/B quadrature Analogue velocity (oscillator) mode Host commands (SCL compatible)Si Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features: Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature Host control mode Idle current reduction Anti-resonance Torque ripple smoothing ...
Easy to use unipolar stepper drive (4 Phase)Compact ...
Description:
Easy to use unipolar stepper drive (4 Phase)Compact size - 55 x 40mm Full step and half step modes Integral internal clock, external LS-TTL frequency can be used Rated at 350mA per phase at 24VFitted with MTA 100 6 way ...