10-27559, Single-Sided Stripboard Epoxy Glass 233.4 x 160 x 1.6mm DIN 41612 FR4

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Single-Sided Stripboard

DIN Type Stripboards

Suitable for use with the KM6-II eurocard sub-rack systems

The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

Note

Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

Specifications
Attribute Value
Base Material Epoxy Glass Fabric Laminate
Number of Sides 1
Dimensions 233.4 x 160 x 1.6mm
Hole Diameter 1mm
Hole Pitch 2.54 x 2.54mm
Connection DIN 41612
FR Material Grade FR4
Length 233.4mm
Thickness 1.6mm
Width 160mm
4 In stock for delivery within 2 working days
Unit of sale: Each
51.07
(exc. VAT)
62.82
(inc. VAT)
units
Per unit
1 - 4
€51.07
5 - 9
€48.51
10 - 39
€45.96
40 +
€43.41
Related Products
Roth Elektronik offers an excellent range of epoxy ...
Description:
Roth Elektronik offers an excellent range of epoxy glass hard fabric eurocards for a wide range of grid sizes These two-sided 35um Cu eurocards are plated through and are 100mm x 160mm in dimension. Epoxy glass hard fabric FR4 1.50 ...
Matrix boards with 1mm holes on a 254mm ...
Description:
Matrix boards with 1mm holes on a 254mm pitch. Hot air levelled Through holes have etched-free ring on ground plane side to provide isolated ground plane on component side Plated through holes for both DIN connector and PCB matrix (RE334 ...
The RE921 from Roth Elektronik iis an epoxy ...
Description:
The RE921 from Roth Elektronik iis an epoxy glass hard fabric adapter for MSOP16 This two-sided 35um Cu adapter is plated through and is 15.88mm x 22.57mm in dimension. Adapter for MSOP16Epoxy glass hard fabric FR4 1.50 mm Two-sided 35 ...
Matrix boards with 1mm holes on a 254mm ...
Description:
Matrix boards with 1mm holes on a 254mm pitch. Prototyping board SMDEpoxy fibre-glass 1.50 mm Single-sided 35 μm Cu Hot air leveling (HAL-Leadfree)Solder stop mask Hole spacing 1,27 x 1,27 mm.