Go No-Go Plug Gauge M3

  • RS Stock No. 177-0512
  • Mfr. Part No. 16012
  • Manufacturer Volkel
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring.The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap).The scrap side of the thread plug gauge must not be able to be manually turned more than two turns into the cut thread (without using excessive force). If it can be screwed in more, the thread does not meet the requested standards (=scrap).The reference temperature for parts and gauges is 20° Celsius.

Specifications
Attribute Value
Plug/Ring Plug
Gauge Type Go/No Go
Thread Size M3 x 0.5
Tolerance 6H
Single or Double Ended Double
Imperial or Metric Metric
8 In stock for delivery within 2 working days
Unit of sale: Each
70.86
(exc. VAT)
85.74
(inc. VAT)
units
Per unit
1 +
€70.86
Calibration Options:
Related Products
The Volkel Go No-Go plug gauge M18x25 is ...
Description:
The Volkel Go No-Go plug gauge M18x25 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...
The Volkel Go No-Go plug gauge M10x125 is ...
Description:
The Volkel Go No-Go plug gauge M10x125 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread ...
The Volkel Go No-Go Plug Gauge M5x08 is ...
Description:
The Volkel Go No-Go Plug Gauge M5x08 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...
The Volkel Go ring gauge M4x07 is calibrated ...
Description:
The Volkel Go ring gauge M4x07 is calibrated at a measurement laboratory using IAC thread scanners. These NO-GO thread gauges are marked in red. This thread NO-GO ring gauge must not screw into the part by hand by more than ...