FTDI Chip FT-MOD-4232HUB, USB Serial Hub Module, USB 2.0 at 480MBps, 5 V, 36-Pin

  • RS Stock No. 720-3736
  • Mfr. Part No. FT-MOD-4232HUB
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

USB Hi-Speed Serial/Hub Module

Designed to connect to FTDI’s V2DIPx modules, as well as any USB Host interface (e.g. PC) to expand the number of interfaces that can be accessed downstream from a Host
USB 2.0 Hi-Speed compatible
One standard Type A USB header to connect to the Host
USB Hi-Speed FT4232H device for USB-Serial/Bitbang communications. Entire USB protocol handled by USB module
USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports
USB hub controller and FT4232H are USB bus powered – no external power supply needed
External power input pin available to supply external downstream USB ports
Support for USB suspend and resume
4 Asynchronous serial interfaces available which include 2 independent MPSSE engines
Defaults to 4 RS-232 interfaces
Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
One dual-port USB A socket and 0.1 inch pitch header to support up to 3 downstream USB ports
Green/Amber status LED for downstream USB port 2&3
LED indicating power supply to external downstream USB ports
Onboard EEPROM 93LC56 for FT4232H configuration
UHCI / OHCI / EHCI host controller compatible

Specifications
Attribute Value
Number of Transceivers 1
Data Rate 480Mbps
Protocols Supported USB 2.0
Power Supply Type Single
Typical Single Supply Voltage 5 V
Mounting Type Through Hole
Pin Count 36
Dimensions 75.04 x 23.37 x 19.9mm
Height 19.9mm
Length 75.04mm
Width 23.37mm
32 In stock for delivery within 2 working days
Unit of sale: Each
32.61
(exc. VAT)
40.11
(inc. VAT)
units
Per unit
1 - 9
€32.61
10 - 19
€30.98
20 - 49
€29.41
50 +
€27.94
Related Products
The FT245B and FT245R are USB to parallel ...
Description:
The FT245B and FT245R are USB to parallel FIFO converter interfaces Single chip USB to parallel FIFO bidirectional data transfer interface Entire USB protocol handled on the chip - No USB-specific firmware programming requiredFT245B USB compatibleFT245R USB 2.0 Full Speed ...
The FTDI Chip FT230X and FT234XD are Ful ...
Description:
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices The FT231X is a Full Speed USB to Full Handshake UART interface.They have a fully integrated MTP memory and an integrated clock circuit which ...
The FT200XD and FT201X ICs are Full Speed ...
Description:
The FT200XD and FT201X ICs are Full Speed USB 20 devices that offer a compact bridge to I²C bus. The devices can acknowledge I²C bus data, capable of operating up to 3.4 Mbps, with low power consumption (8 mA). They ...
The FT220X and FT221X Full Speed USB 20 ...
Description:
The FT220X and FT221X Full Speed USB 20 ICs offer a compact bridge to 4-Bit SPI / FT1248 interfaces. The devices can acknowledge USB bus data, capable of operating up to 500 kbps, with low power consumption (8 mA). The ...