Abracon PRO-OB-572 OnBoard WiFi Antenna with SMA Connector, NB IoT

The Abracon antenna uses PIFA technology and should thus be mounted on a ground plane. If there are several layers in the PCB, there is an advantage to add vias for smooth interconnection of the ground areas to avoid splits in the ground plane. It is also important that there is a ground clearance around the NC pads and the RF feed pad, through all layers of the PCB. It is recommended to implement a matching network to optimize the antenna impedance in your application. The components can be positioned under the antenna.

Support NB –IoT Bands
791 to 960 MHz + 1710 to 2170 MHz
Profile of 10 mm
Mixed linear polarization
Max gain of 2.3 dBi
Efficiency grater than 49%
Surface mount