Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 1 - 20 of 169 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 531-425
BrandRS PRO
€44.61
Each
units
Positioner QM/TNM 16 -
RS Stock No. 191-6811
BrandRS PRO
€37.83
Each
units
Positioner - - -
RS Stock No. 822-7717
Mfr. Part No.63811-8775
BrandMolex
€45.72
Each
units
Locator T9999 - 63811
RS Stock No. 822-7755
Mfr. Part No.63819-0975
BrandMolex
€53.75
Each
units
Locator T9999 - 63819
RS Stock No. 360-1713
Mfr. Part No.TH1A
BrandGlenair
€237.50
Each
units
Turret M22520/1-02 - -
RS Stock No. 876-2166
Mfr. Part No.601077
€74.28
Each
units
Indexing Device Bantam ROTA-CRIMP - -
RS Stock No. 114-7712
Mfr. Part No.09990000111
BrandHARTING
€16.13
Each
units
Locator Han D - -
RS Stock No. 822-7751
Mfr. Part No.63819-0275
BrandMolex
€55.42
Each
units
Locator T9999 - 63819
RS Stock No. 822-7758
Mfr. Part No.63819-0075
BrandMolex
€53.75
Each
units
Locator T9999 - 63819
RS Stock No. 114-7920
Mfr. Part No.09990000112
BrandHARTING
€14.34
Each
units
Locator Han-Com - -
RS Stock No. 827-3669
Mfr. Part No.3443-82-08
Brand3M
€306.14
Each
units
Locator 451 8 3443
RS Stock No. 515-1096
Mfr. Part No.M22520/2-09
BrandGlenair
€268.94
Each
units
Positioner M22520/2-09 - -
RS Stock No. 343-2826
Mfr. Part No.TH592
BrandGlenair
€244.53
Each
units
Turret AF8 - -
RS Stock No. 721-1443
Mfr. Part No.1208474
€49.34
Each
units
Assembly Tool SACC BIT M8-D12 - -
RS Stock No. 765-9858
Mfr. Part No.15019/SP
BrandBulgin
€139.76
Each
units
Positioner 6000 - -
RS Stock No. 803-4376
Mfr. Part No.1205668
€14.37
Each
units
Locator CF 3000 LOC 1.5 - -
RS Stock No. 864-7042
Mfr. Part No.310611-1
€1,368.61
Each
units
Crimping Jaw TETRA-CRIMP - -
RS Stock No. 687-5762
Mfr. Part No.89853093A
BrandSouriau
€464.28
Each
units
Positioner MicroComp - -
RS Stock No. 822-7632
Mfr. Part No.63800-0143
BrandMolex
€39.522
Each (In a Pack of 5)
units
Cam Follower Pin T9999 - 63800
RS Stock No. 765-9848
Mfr. Part No.15021/SP
BrandBulgin
€135.28
Each
units
Positioner 6000 8 -
Related Products
Lightweight, robust handheld tool for cutting woven plastics ...
Description:
Lightweight, robust handheld tool for cutting woven plastics eg. braided sleeving Heats up quickly at the touch of a button and cuts braided sleeving cleanly in seconds Individual threads melt and fuse to avoid fraying of braided sleeving Weight: 1150 ...
The HSGO hot cutting tool is a light, ...
Description:
The HSGO hot cutting tool is a light, robust, hand-held device to cut synthetic fabrics such as braided sleeving It heats up quickly with the press of a button and cuts the sleeving cleanly in a matter of seconds. The ...
This device is equipped with a heated wire ...
Description:
This device is equipped with a heated wire for cutting and soldering nylon braidsThis process prevents wire strands from fraying after cutting.An adjustable transformer powers the cutter.
The multi-contact is an MES-CZ series, locator adjustable ...
Description:
The multi-contact is an MES-CZ series, locator adjustable crimp tool It is suitable for crimping from 0.14 to 4mm² cables with 1mm, 1.5mm, and 3mm with Combi Tac contacts. The wire size of tool ranges between 26AWG and 22 AWG. ...