RS PRO Plier Crimping Tool for Bootlace Ferrule

  • RS Stock No. 683-1614
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): SE
Product Details

Hand Crimp Tools for End Splice Terminals

From the trusted RS PRO brand, a range of “original line” hand crimp tools for both insulated and uninsulated ferrules. The ergonomic ratchet tools produce trapeze crimps, covering a wide range of cables sizes from 0.25 mm² to 50.0 mm². Tools are suitable for both right and left-handed operation.
• Hand tool 683-1605 is for crimping ferrules with a wire size range of 0.5 mm² to 6 mm²
• Hand tool 683-1614 is for crimping ferrules with a wire size range of 10 mm² to 25 mm²
• Hand tool 683-1617 is for crimping ferrules with a wire size range of 35 mm² to 50 mm²

Features and Benefits

● Non-slip main handle and low friction moving handle ensure a comfortable hand grip
● Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
● Full cycle crimp mechanism to ensure consistent, reliable crimp
● Ratchet release mechanism to clear mis-crimps and obstructions
● Precision eccentric adjustment for consistent performance and ability to calibrate
● Each tool has a unique serial number for traceability
● Durable: life span exceeds 50000 cycles
● High strength, through hardened alloy Swedish steel construction

Typical Applications
Crimping tools can be used for a variety of applications:-
• Maintenance & repair
• Electrical Installations
• Cable assemblies

How to maintain the product?
• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly

*Use a light mineral-free oil

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas- tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Tool Type Plier
Crimp Connector Type Bootlace Ferrule
Overall Length 230 mm
1 Within 1 working day(s) (IE stock)
52 Within 2 working day(s) (EU stock)
Unit of sale: Each
163.51
(exc. VAT)
197.85
(inc. VAT)
units
Per unit
1 +
€163.51
Related Products
Self-adjusting with hardened steel bladesMiddle carbon steel sheet ...
Description:
Self-adjusting with hardened steel bladesMiddle carbon steel sheet frame Glass filled nylon injection soft handle Integral wire cutter (for single wires), stripping length adjustment and jaw tension control Replacement stripping jaws are available (RS 613-050).
Crimping Pliers burnished, handles with multi-component grips Parallel ...
Description:
Crimping Pliers burnished, handles with multi-component grips Parallel crimping performance for small connectors Precision dies and integral lock with self-releasing mechanism Fixed locator for D-Sub micro plugs for an exact positioning of connector and cable Readjustable crimping pressure Toggle lever ...
Handy, transparent dispenser box Rotating lid with opening ...
Description:
Handy, transparent dispenser box Rotating lid with opening to remove individual end sleeves (ferrules)With insulated end sleeves (ferrules) by DIN colour code
Self-adjusting wire end ferrule tool with front operation ...
Description:
Self-adjusting wire end ferrule tool with front operation As opposed to front entry, single-sided open profile enables a contact from 008 → 2.5 mm2 to be input from the side (improved access)Adjusts automatically to different cable cross-sections Produces a square ...