Si8920BC-IP Silicon Labs, Current Shunt Monitor Single Differential 8-Pin DIP

  • RS Stock No. 901-3976
  • Mfr. Part No. Si8920BC-IP
  • Manufacturer Silicon Labs
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

Si8920 Isolated Amplifier for Current Shunt Measurement

The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.

Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.

High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.

To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.

The Si8920 is available in 4 variants:
Si8920AC-IP (RS 901-3967) with an input range of ±100 mV in a Gull-Wing DIP-8 package
Si8920BC-IP (RS 901-3976) with an input range of ±200 mV in a Gull-Wing DIP-8 package
Si8920AD-IS (RS 901-3979) with an input range of ±100 mV in a SOIC-16 package
Si8920BD-IS (RS 901-3973) with an input range of ±200 mV in a SOIC-16 package

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 3 → 5.5 V
Number of Channels per Chip 2
Output Type Differential
Maximum Supply Current 5.5 mA
Mounting Type Through Hole
Package Type DIP
Pin Count 8
Dimensions 9.9 x 6.6 x 3.44mm
Height 3.44mm
Length 9.9mm
Maximum Operating Supply Voltage 5.5 V
Width 6.6mm
Minimum Operating Supply Voltage 3 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
184 In stock for delivery within 2 working days
Unit of sale: Each (In a Pack of 2)
3.495
(exc. VAT)
4.299
(inc. VAT)
units
Per unit
Per Pack*
2 - 8
€3.495
€6.99
10 - 48
€3.40
€6.80
50 - 98
€3.32
€6.64
100 - 248
€3.045
€6.09
250 +
€2.94
€5.88
*price indicative
Packaging Options:
Related Products
Current Sense Amplifiers accurately amplify small voltages in ...
Description:
Current Sense Amplifiers accurately amplify small voltages in the presence of large common-mode voltage
Accurate sensing of currents in a circuit is ...
Description:
Accurate sensing of currents in a circuit is central to enhance application safety
Low-Cost Single/Dual/Quad High-Side Current-Sense Amplifiers±05% Typical Full-Scale Accuracy+3V ...
Description:
Low-Cost Single/Dual/Quad High-Side Current-Sense Amplifiers±05% Typical Full-Scale Accuracy+3V to +28V Supply Operation Adjustable Current-Sense Capability with External Sense Resistor Buffered Output Voltage with 2mA Drive1mA (typ) Supply Current2.0MHz Bandwidth (Gain = +20V/V)Automotive Temperature Range (-40°C ...
Current Sensing Amplifiers have a voltage output that ...
Description:
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail Hence they measure the current flowing in that power rail.