Recom REC3 DC-DC Converter, ±15V dc/ ±100mA Output, 4.25 → 5.75 V dc Input, 3W, Through Hole, +80°C Max Temp

Regulated output
1kVdc isolation
Continuous short circuit protection
Efficiency at full load to 65%
DIP24 package

MTBF to MIL-HDBK 217F.
Operating temperature is without derating.

EN-60950-1, UL-60950-1

UL recognised

Energise your applications with this DC-DC converter from RECOM. It's a PCB-mounting device that changes incoming direct currents to the correct values needed by your equipment. The versatile component delivers isolated outputs or generates dual rails from a single supply. Thanks to the built-in regulator, you can bank on load-independent consistent voltages for glitch-free performance. Momentary power bursts of 140% support large capacitive loads or high start-up demands. By maintaining a barrier between DC inputs and outputs, it keeps a firm hold on safety too.

• Through-hole mounting for convenient PCB installation
• Hardwearing PDIP package insulates live components for better electrical safety
• Continuous short-circuit protection guards against faults for improved durability and reduced downtimes
• Wide operating temperature range between -40°C and +80°C for use in harsh conditions

• Server rooms
• Consumer electronics
• Smart lighting installations
• Industrial packaging and assembly lines
• Medical equipment

Through-hole mounting lets you simply align your DC-DC converter with the designated holes on your PCB and then push the pins through the holes. When soldered, this creates a strong bond with the board to support high-voltage components under mechanical stress.