TRACOPOWER TEN 12 DC-DC Converter, ±15V dc/ ±400mA Output, 9 → 36 V dc Input, 12W, +85°C Max Temp -40°C Min Temp

12W single/dual output regulated isolated DC-DC converters with a high power density and wide input voltage range. These regulated isolated DC-DC converters have internal filtering to EN 55022 level A and a wide operating temperature range. Typical applications include communications, industrial systems and battery powered mobile equipment.

Ultra-wide 4:1 input voltage range
1.5kVdc input/output isolation
Small package - high power density
High efficiency up to 84%
Input filter to meet EN 55022 Class A and FCC Level A without external components
Continuous short circuit protection
SMD internal construction
Long life and high reliability (MTBF >700000 hours)
Metal case with insulated base plate
Industry standard pin-out

MTBF to MIL-HDBK-217 E
Operating temperature is with derating of 2% per °C above 60 °C.

UL 1950, EN 60950, IEC 60950. Compliance up to 60 VDC input voltage (SELV limit)

cULus

Want a power supply that's always on the level? Trust this DC-DC converter from Traco Power. It adjusts a wide input range between 9 and 36V DC to the steady 15V DC output your system needs for smooth running. As the unit delivers an isolation voltage of up to 1.5kV DC, it puts up a barrier between the input and output sides to prevent electrical hazards. Mount it in a jiffy by soldering the pins to the through holes on your board.

• Integrated continuous short-circuit protection to prevent electrical faults
• Tough nickel-plated steel case resists corrosion, so is safe for use in damp settings
• Low ripple and noise of 50mVpk-pk for reduced electrical disturbance

• Consumer electronics
• Telecommunications networks
• Security systems
• Computer peripherals

A mean time between failures of more than 700,000 hours indicates it's built to stand the test of time with no maintenance.

An efficiency rating of 84% indicates this converter produces minimal heat waste during the conversion process. This improves system stability and reduces the risk of component damage.

UL Recognised; EN60950; UL1950