- RS Stock No.:
- 186-5512
- Mfr. Part No.:
- EV-520-UK
- Manufacturer:
- Beha-Amprobe
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 186-5512
- Mfr. Part No.:
- EV-520-UK
- Manufacturer:
- Beha-Amprobe
Technical data sheets
Legislation and Compliance
Product Details
Beha-Amprobe Car Charging Station Tester
Get access to the socket-outlets of a charging station to perform safety and functional tests, while simulate presence of an electrical vehicle
The EV-500 Series Test Adapter Kits are designed to test function and safety of charging stations mode 3 for AC charging. The Adapter Kit allows you to conduct tests in combination with appropriate test instruments like an installation tester (for example the Beha-Amprobe ProInstall Series).
The EV-500 Series Test Adapter Kits are designed to test function and safety of charging stations mode 3 for AC charging. The Adapter Kit allows you to conduct tests in combination with appropriate test instruments like an installation tester (for example the Beha-Amprobe ProInstall Series).
Functions
- PE Pre-Test: With this safety feature the PE conductor can be tested for possible presence of dangerous voltage against earth.
- Proximity Pilot (PP) state Cable Simulation: With PP State rotary switch the adapter can simulate various current capabilities of charging cables.
- Control Pilot (CP) state Vehicle Simulation: With CP State rotary switch selector various charging states can be simulated.
- Simulation of CP error E
- Simulation of PE error (Earth fault)
Product Information
- Suitable to vehicle charging stations with charging mode 3
- EV-connectors for type 2 and type 1
- Measuring terminals L1, L2, L3, N and PE to connect test device like installation tester to perform safety and functional tests.
- Terminals for CP signal output to check communication between adapter (=simulated electrical vehicle) and charging station.
Highlights
- Separate phase indication by three LED lamps for easy check if voltage is present.
- Mains socket offering the possibility to connect an external load to check if the electric power meter works and counts in the right manner.
- IP 54 rating - Dust and splashing water protected
Supplied with
- EVA-500-UK Test Adapter
- EVC-20 Test Cable for EV charging station type 2 with socket outlet or fixed cable with vehicle connector
- User Manual
- Soft Carrying Bag
- Type of mains outlet socket: UK socket
Specifications
Attribute | Value |
---|---|
Model Number p | EV-500 |
Maximum Voltage Measurement | 250/430V |
Test Type | Control Pilot (CP), PE Error (Earth Fault), PE Pre-Test, Proximity Pilot (PP) |
Earth Resistance Measurement | Yes |
IP Rating | IP54 |
Safety Category Voltage | 300V |
Weight | 1kg |
Length | 220mm |
Width | 110mm |
Height | 45mm |
Minimum Operating Temperature | 0°C |
Power Source | Mains |
Maximum Operating Temperature | +40°C |
Safety Category | CAT II 300 V |
Dimensions | 220 x 110 x 45mm |
Safety Category Level | CAT II |