Pressmaster Hand Crimping Tool for Crimp Contact

  • RS Stock No. 492-9595
  • Mfr. Part No. 4300-3149/AAB
  • Manufacturer Pressmaster
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Pressmaster (MCT) Mobile Crimp Tool

The MCT (mobile crimp tool) is a crimping tool frame for use with MCT die sets. Easily interchangeable crimp dies are kept together with a special pin to simplify handling. The mobile tool can accept a wide variety of die sets, covering most applications with just one tool frame. See die set part number 492-9618 where a full range of suitable die sets are available.

Features and Benefits:
• Non-slip main handle and low friction moving handle ensure a comfortable hand grip
• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
• Unique mechanism significantly reduces hand force requirement over competing for crimping tools
• The non-slip pad holds the tool in place when using on a work surface
• Full cycle crimp mechanism to ensure consistent, reliable crimp
• Ratchet release mechanism to clear miscrimps and obstructions
• Precision eccentric adjustment for consistent performance and ability to calibrate
• Hole in handle allows attachment of safety strap for working overhead
• Each tool has a unique serial number for traceability
• Durable: lifespan exceeds 50000 cycles
• High strength, through hardened alloy Swedish steel construction

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Pressmaster Crimp Tools

Specifications
Attribute Value
Crimp Connector Type Crimp Contact
Crimp Tool Type Plier
Primary Keyword Crimping Tool
52 In stock for delivery within 2 working days
Unit of sale: Each
58.09
(exc. VAT)
71.45
(inc. VAT)
units
Per unit
1 +
€58.09
Related Products
The crimp tooling detailed on this and subsequent ...
Description:
The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for ...
The Pressmaster range of Komfort tools are ergonomically ...
Description:
The Pressmaster range of Komfort tools are ergonomically designed to give maximum comfort with the minimum hand pressure required for reliable and repeatable crimping The standard version has extended handles allowing two handed operation for improved leverage, reducing fatigue and ...
Lightweight design and very high density, micro Comp® ...
Description:
Lightweight design and very high density, micro Comp® is an alternative to HD DSUB with superior characteristics,A flexible alternative to MIL-STD 83513 connectors Stainless steel Compatible with MIL-STD 83513 interfaces.
The Cinch Connectivity series of high-quality Crimp Tools ...
Description:
The Cinch Connectivity series of high-quality Crimp Tools have been designed for professionals and serious DIY enthusiast A frame made from the best quality steel, offer a long life and hassle-free operation. They feature a full cycle ratchet mechanism and ...