Aim-TTi TGP110 Pulse Generator, 0.1 Hz min, 10MHz max, RS Calibration

The TGP110 is a dedicated pulse generator that operates in a quite different way from a function generator. It can generate pulses of a set width regardless of the repetition rate offering duty cycles which can extend down to 1 in 100 million. In addition to continuous operation, single or multiple pulses can be generated in response to trigger or gating signals with precisely defined timing relationships using the delay facility.

0.1Hz to 10MHz frequency range
50ns to 5s pulse width, independent of period
Fully variable pulse delay, 50ns to 5s
Square wave, double pulse and delayed pulses
Free-run, gated and triggered modes
Output variable 0.1V to 10V from 50Ω
Complement switch, TTL and sync outputs

The Aim-TTi pulse generator has a frequency ranging between 0.1Hz and 10MHz. This is a dedicated pulse generator that operates in a quite different way from a function generator. This generator can generate pulses of a set width regardless of the repetition rate offering duty cycles which can extend down to 1 in 100 million. In addition to continuous operation, single or multiple pulses can be generated in response to a trigger or gating signals with precisely defined timing relationships using the delay facility. It has four pulse modes like normal pulse, a square pulse, double pulse and delayed pulse.

Pulse width ranges between 50nano seconds and 5seconds independent of period
Fully variable pulse delay ranges between 50nano seconds and 5seconds
Square wave, double pulse and delayed pulses
Free-running, gated and triggered modes
Output variable ranging between 0.1V and 10V from 50ohm
Complement switch, TTL and sync outputs

Telecommunication
Electronics laboratories
Educational institutes
Electronics designing
Service and maintenance

EN61010-1
EN55081-1
EN50082-1