CRC 500 ml Can GALVACOLOR 7016 Rust & Corrosion Inhibitor

This rust and corrosion inhibitor is a zinc-phosphate protective coating designed for effective long-term corrosion protection. With a convenient 500ml can, it provides a reliable solution for protecting metals and alloys. The product meets the criteria for ISO 12944-2 protective category C3, making it suitable for various applications in the automation, electronics, electrical, and mechanical industries.

• Free from lead and chromates for safer use
• Provides effective metal corrosion protection
• Achieves quick drying time for efficient use
• Compatible with maximum operating temperatures of +20°C
• Formulated as a primer and topcoat in one

• Ideal for identifying utility conduits
• Used for industrial rust treatment solutions
• Suitable for long-term protection of metal structures
• Applicable in environments requiring corrosion protection
• Effective for coatings in electrical and mechanical assemblies

For the best results, the surface should be clean and dry, and the product should be sprayed from a distance of 20 to 30 cm. It is recommended to apply a thin, even film, using multiple lighter coats rather than a single heavy layer.

The drying time for an active film of 30μm is around 20 minutes, allowing for additional coats to be applied quickly if needed.

This product is designed to protect a variety of metals and alloys, making it suitable for diverse industrial applications including machinery and construction materials.

It should only be used in well-ventilated areas, and any loose dirt should be removed using a wire brush prior to application to ensure proper adhesion.

If the aerosol valve is not maintained, it may become clogged. To clean it, turn the can upside down and spray until only propellant is dispensed, ensuring reliable operation for future use.