3M Scotch-Brite CF-SR Super Fine Abrasive Hand Pad

The Scotch-Brite™ Pre-cut rolls are thin, tough and highly conformable making them ideal for difficult to reach areas. Supplied on a centre pull roll with easy to tear sections. MX-SR comes as a roll of over 4 metres of pre-cut sections.

The sharp cutting non-woven rolls is super flexible and conformable for cleaning or fine finishing. The Scotch-Brite™ sheets are a great replacement for steel wool, whilst eliminating contaminants.

The most aggressive cutting grade is purple, still being highly conformable this abrasive is great for sanding in paint preparations on wood, metal and plastics. It works great at scuffing new panels, door jambs and under bonnet areas. The abrasive roll is ideal for sanding prior to priming and painting for successful mechanical adhesion.

The Grey Scotch-Brite™ sheets are great for preparing colour coats and simple blending. This abrasive roll is used for light scuffing and sanding for primer and paint applications.

• A good alternative to steel wool, wire brushes, sandpaper, and other nonwoven products for cleaning or finishing tasks
• Suitable for use on wood, metal, plastics, ceramics, porcelain, glass, rubber, or composites
• Reusable pad resists tearing, splintering, shredding, loading and will never rust, providing a long, useful life
• Can be folded, stacked, or rolled for effective cleaning or conditioning on flat, irregular, or contoured surfaces

Non-Woven Abrasives have abrasive grains bonded to flexible nylon fibres, which provide a controlled consistent finish. The open web construction provides and maintains a consistent cutting rate.

3M is a leading innovator of abrasive technologies, constantly evolving to provide ideal solutions to industrial and commercial applications. With 3M you can be assured of a wide selection of quality products.

Create smooth surfaces with these blending hand pads from Scotch-Brite. The pre-cut pads are thin, tough and can be shaped easily shaped, making them a handy choice for use in hard-to-reach areas and ideal for replacing steel wool, sandpaper and wire brushes. They're supplied on a centre-pull roll for easy access, with more than four metres of sections measuring 150mm high by 115mm wide. These ultra-fine abrasive pads are ideal for preparing surfaces for colour coats and simple blending. In priming and paint applications, use them for mild scuffing and sanding to create a surface that will receive paint well and ensure adhesion.

• Resistant to rust for a long lifespan
• Flexible enough to fold, for versatile use with small workpieces
• Suitable for hand use and for oscillating and dual pad rubbing machines

• Painting and decorating
• Carpentry and woodwork
• Ceramic manufacture

Non-woven pads are made of abrasive grains bonded to flexible nylon fibres that are attached to each other in a way similar to felting. They can be used to deburr, clean and finish a wide range of materials.