Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Read more Read less

Filters

Viewing 21 - 40 of 139 products
Results per page
Description Price Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS Stock No. 473-0711
BrandRS PRO
€5.27
Each
units
- 14.0 mm 1 - Centre
RS Stock No. 875-4761
BrandRS PRO
€22.18
Each
units
- 3 → 9.5 mm 5 - Parallel Pin
RS Stock No. 456-3634
BrandRS PRO
€23.92
1 Set
Set(s)
- 3 → 4 mm 6 - -
RS Stock No. 668-5755
BrandRS PRO
€7.18
Each
units
- 2.5 mm 1 - Centre
RS Stock No. 668-5761
BrandRS PRO
€7.95
Each
units
- 5.0 mm 1 - -
RS Stock No. 182-9792
BrandRS PRO
€4.63
Each
units
- 6.0 mm 1 - Parallel Pin
RS Stock No. 182-9790
BrandRS PRO
€4.64
Each
units
- 4.0 mm 1 - Parallel Pin
RS Stock No. 182-9788
BrandRS PRO
€4.64
Each
units
- 3.0 mm 1 - Parallel Pin
RS Stock No. 182-9787
BrandRS PRO
€3.91
Each
units
- 4.0 mm 1 - Centre
RS Stock No. 600-896
BrandRS PRO
€29.80
1 Set
Set(s)
- 2 → 5 mm 6 - Spring Pin
RS Stock No. 701-0562
BrandRS PRO
€34.27
1 Set
Set(s)
- 10.0 mm 5 - Drift
RS Stock No. 423-2627
BrandRS PRO
€11.20
1 Set
Set(s)
- - 3 - Centre
RS Stock No. 473-0682
BrandRS PRO
€7.88
Each
units
- 4.0 mm 1 - Replaceable
RS Stock No. 182-9791
BrandRS PRO
€4.63
Each
units
- 5.0 mm 1 - Parallel Pin
RS Stock No. 875-4758
BrandRS PRO
€12.42
Each
units
- - 3 - Centre
RS Stock No. 545-389
Mfr. Part No.E171RS
BrandEclipse
€23.65
Each
units
- 4.0 mm 1 - Automatic
RS Stock No. 530-722
Mfr. Part No.MODM.CG
BrandFacom
€138.74
Each
units
- 2 → 8 mm 11 - -
RS Stock No. 329-7780
Mfr. Part No.257.G
BrandFacom
€39.63
Each
units
- 16.0 mm 1 - Centre
RS Stock No. 784-5945
Mfr. Part No.256.2.5
BrandFacom
€4.74
Each
units
- 7.0 mm 1 - Centre
RS Stock No. 494-076
Mfr. Part No.4-18-299
BrandStanley
€37.10
Each
units
- 1.5 → 6 mm 12 - -
Related Products
The Greenlee hole punch is a heavy-duty tool ...
Description:
The Greenlee hole punch is a heavy-duty tool used for circular cut-outs of size 204mm.Note:Use with hydraulic drivers only. Available in 16 sizes including Pg and ISO sizes Greatly increased life expectancy compared to standard punches Split slugs fall free ...
High quality punches for fast accurate panel punching ...
Description:
High quality punches for fast accurate panel punching Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.363-0632 or stock no. 398-6187 an adaptor ...
The Teng Tools PPS06 series is a 6 ...
Description:
The Teng Tools PPS06 series is a 6 piece parallel pin punch set It has special tempered steel construction with hardened point for longer life. Overall length 150mm with hexagon grip and rounded shaft area Supplied with a handy storage ...
This exceptional Punch Set from Stanley Proto consists ...
Description:
This exceptional Punch Set from Stanley Proto consists of 7 high-quality punches made from specially treated S2 steel that guarantees superior durability and strength Punches are finished in black-oxide to help prevent rust corrosion and feature parabolic striking end to ...