ITW Devcon 2 Ton Paste Adhesive, 50 ml

Strong clear epoxy adhesive
10 minute pot life, cure time 16 hrs
Extremely powerful, water resistant
93°C maximum operating temperature
Resistant to water; oil; petrol; chemicals

The ITW Devcon 50ml epoxy resin is a 2-part structural resin and dispensing systems which allow the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply this adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required

• Pot life is 10 minutes
• Cure time is 16 hours
• Setting time is 30 minutes to 35 minutes
• Extremely powerful
• Resistant to water, oil, petrol and chemicals
• Setting time is 30 minutes to 35 minutes
• Shear strength is 15.5MPa
• The operating temperature ranges between -40°C and 93°C

•
Ceramic
• Concrete
• Ferrite
• Ferrous metal
• Non-ferrous metal
• Glass
• Wood

ITW Devcon Structural Adhesives

Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.