- RS Stock No.:
- 176-9759
- Mfr. Part No.:
- 038909 KNB-T0
- Manufacturer:
- Eaton
110 In stock for delivery within 2 working days
Price Each
€1.99
(exc. VAT)
€2.45
(inc. VAT)
Units | Per unit |
1 + | €1.99 |
- RS Stock No.:
- 176-9759
- Mfr. Part No.:
- 038909 KNB-T0
- Manufacturer:
- Eaton
- COO (Country of Origin):
- GB
Eaton Non-Fused Switch Disconnectors - P1 Series Isolators
The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
Performs local isolation, manual override & safety switch functions
P1 Series fit a standard front plate of 45 x 45 mm
For spare rotary thumb stick (black) see stock no. 176-9759
P1 Series fit a standard front plate of 45 x 45 mm
For spare rotary thumb stick (black) see stock no. 176-9759
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Eaton Moeller Series Cam Switch Handle, Black Handle - 038909 KNB-T0
This cam switch handle by Eaton is a reliable and essential component designed to work seamlessly with the P1 Series Switch, T0 Series Switch, and T3 Series Switch. It features a durable black thumb-grip design that handles smooth operation and long-lasting performance in various industrial settings.
Features & Benefits
• Design verification as per IEC/EN 61439 standards
• Resistance to thermal stability and resistance of insulating materials
• Suitable for switch disconnector
• Certified for use in various industrial applications
• Resistance to thermal stability and resistance of insulating materials
• Suitable for switch disconnector
• Certified for use in various industrial applications
Applications
• Ideal for rotary handles for power circuit breakers
• Suitable for switch disconnector applications
• Used with T0 series switch and P1 series switch
• Suitable for switch disconnector applications
• Used with T0 series switch and P1 series switch
Can it withstand extreme temperatures?
The cam switch handle is designed to operate in a wide temperature range from -25°C to 50°C, ensuring reliability in various environments.
Will it work with power circuit breakers?
Yes, the handle is suitable for use with switch disconnector applications.
Is it certified for industrial use?
The cam switch handle meets rigorous standards and certifications, making it a reliable choice for industrial applications.
Note
Eaton formerly known as Moeller
Attribute | Value |
---|---|
Handle Colour | Black |
Series | Eaton Moeller |
Height | 26mm |
Width | 28mm |
Depth | 40mm |
For Use With | P1 Series Switch, T0 Series Switch, T3 Series Switch |
- RS Stock No.:
- 176-9759
- Mfr. Part No.:
- 038909 KNB-T0
- Manufacturer:
- Eaton
- COO (Country of Origin):
- GB
Eaton Non-Fused Switch Disconnectors - P1 Series Isolators
The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
Performs local isolation, manual override & safety switch functions
P1 Series fit a standard front plate of 45 x 45 mm
For spare rotary thumb stick (black) see stock no. 176-9759
P1 Series fit a standard front plate of 45 x 45 mm
For spare rotary thumb stick (black) see stock no. 176-9759
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Eaton Moeller Series Cam Switch Handle, Black Handle - 038909 KNB-T0
This cam switch handle by Eaton is a reliable and essential component designed to work seamlessly with the P1 Series Switch, T0 Series Switch, and T3 Series Switch. It features a durable black thumb-grip design that handles smooth operation and long-lasting performance in various industrial settings.
Features & Benefits
• Design verification as per IEC/EN 61439 standards
• Resistance to thermal stability and resistance of insulating materials
• Suitable for switch disconnector
• Certified for use in various industrial applications
• Resistance to thermal stability and resistance of insulating materials
• Suitable for switch disconnector
• Certified for use in various industrial applications
Applications
• Ideal for rotary handles for power circuit breakers
• Suitable for switch disconnector applications
• Used with T0 series switch and P1 series switch
• Suitable for switch disconnector applications
• Used with T0 series switch and P1 series switch
Can it withstand extreme temperatures?
The cam switch handle is designed to operate in a wide temperature range from -25°C to 50°C, ensuring reliability in various environments.
Will it work with power circuit breakers?
Yes, the handle is suitable for use with switch disconnector applications.
Is it certified for industrial use?
The cam switch handle meets rigorous standards and certifications, making it a reliable choice for industrial applications.
Note
Eaton formerly known as Moeller
Attribute | Value |
---|---|
Handle Colour | Black |
Series | Eaton Moeller |
Height | 26mm |
Width | 28mm |
Depth | 40mm |
For Use With | P1 Series Switch, T0 Series Switch, T3 Series Switch |