Phoenix Contact Distribution Block, 18 Way, 0.14 → 4mm², 24A, 500 V, Grey

Phoenix Contact PTFIX series distribution blocks with push in connection offer a flexible distribution solution with different numbers of positions and mounting options. They can be used straight away and expanded as needed. Simply unpack, connect, and you are done.

Push in connection
Voltage: 500 V
Current: 24 A
Variants in 1.5 mm² and 2.5 mm²
2.5 mm² power blocks with additional 6 mm² terminal point
Number of terminal points: 6, 12 and 18
Can be bridged and aligned with standard plug-in bridges
Testing option for all common test probes

Divide an electrical feed into subsidiary circuits using this distribution block from Phoenix Contact. It's an expandable component that features 18 output channels, which can be bridged easily via its conductor shaft to increase the number of outputs. As its housing is made of a thermoplastic material, it's insulated to protect you and your equipment from electrical short circuits.
The unit has push-in terminals that enable direct conductor connection, so you can plug your solid and stranded conductors in without the need for any specialist tools. Thanks to its voltage rating of 500 V and its current rating of 24 A, this device is ideal for high-power industrial applications.
A compact design means you can use this block in tight spaces, and you can also mount it on a DIN rail. You'll find units like this one in common domestic and industrial applications.

• Cable cross-sectional area (CSA) of 0.14 to 4 mm²
• Grey colour
• Not fused
• Wire size of 26 to 12 AWG (American wire gauge)
• Dimensions of 28.6 (W), 58.1 (L) and 28.7 mm (H)

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.