Honeywell E7 Series Pin Plunger Limit Switch, SPDT, IP65, Die Cast Zinc Housing, 240V ac, 10A

RS Stock No.:: 217-7128
Mfr. Part No.:: DTE7-2RN-PG
Manufacturer:: Honeywell

Honeywell E7 Series Pin Plunger Limit Switch, SPDT, IP65, Die Cast Zinc Housing, 240V ac, 10A

Subtotal (1 unit)*

€542.66

(exc. VAT)

€667.47

(inc. VAT)

Stock information currently inaccessible - Please check back later

Units	Per unit
1 +	€542.66

*price indicative

RS Stock No.:: 217-7128
Mfr. Part No.:: DTE7-2RN-PG
Manufacturer:: Honeywell

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Honeywell
	Actuator Type	Pin Plunger
	Product Type	Limit Switch
	IP Rating	IP65
	Contact Configuration	SPDT
	Housing Material	Die Cast Aluminium
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	Threaded Conduit
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	30°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	EN/IEC 60947-5-1, CE, CSA file 15775 (BZ prefix only)
	Hazardous Area Certification	NO
	Mounting Orientation	Diagonal Side
	Operating Force	680g
	Conduit Entry	0.5 to 14 NPSM

	Select all
	Brand Honeywell
	Actuator Type Pin Plunger
	Product Type Limit Switch
	IP Rating IP65
	Contact Configuration SPDT
	Housing Material Die Cast Aluminium
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type Threaded Conduit
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Minimum Operating Temperature 30°C
	Maximum Operating Temperature 70°C
	Standards/Approvals EN/IEC 60947-5-1, CE, CSA file 15775 (BZ prefix only)
	Hazardous Area Certification NO
	Mounting Orientation Diagonal Side
	Operating Force 680g
	Conduit Entry 0.5 to 14 NPSM

Datasheet - DTE7-2RN-PG

Honeywell Limit Switch, Pin Plunger Actuator, 680g Operating Force - DTE7-2RN-PG

This limit switch provides a robust means of detecting position changes and controlling circuits in industrial installations. Constructed for side-diagonal mounting, it employs a pin-plunger actuator and is intended for use where discrete switching is required under mechanical motion or presence detection. The enclosure gives environmental protection suitable for many factory and field settings.

Features and Benefits:

• Die cast aluminium housing delivers corrosion-resistant durability
• IP65 sealed enclosure resists dust and low-pressure water jets
• SPDT snap-action contacts enable Rapid make-and-break switching
• Rated for 10A at AC applications to handle moderate loads
• 250V DC switching capability supports DC control circuits
• Operating force of 680g ensures consistent actuation threshold

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for actuator position sensing in automated valves
• Used for safety cut-off sensing on packaging machinery
• Can be used for limit detection in material handling equipment
• Suitable for integration in control panels requiring threaded conduit entry

What conduit Interface does it provide for wiring?

The unit accepts threaded conduit connections sized 0.5-14 NPSM for secure cable entry.

How should it be mounted to align with mechanical linkages?

It is designed for diagonal side mounting to match common actuator geometries and reduce linkage stress.

What standards underpin its electrical switching design?

The switch conforms to EN/IEC 60947-5-1 functional switching requirements and carries relevant safety approvals.

What temperature range can it tolerate during operation?

It is specified to operate from a minimum of -30°C up to a maximum of 70°C without performance degradation.