The Jumo di eco series temperature indicator is used for visualizing temperatures acquired through Pt100, Pt1000, or KTY2X-6 resistance thermometers in a 2-wire circuit. The measurement is displayed on a 3-digit display with red background lighting. Limit infringements can be monitored with a 10A changeover relay and signalled via an LED. The 3 buttons on the front panel facilitate configuration, switching differential and alarm suppression. The screw terminals on the back of the instrument make an electrical connection. Accessories: PT100 sensor (RS stock no. 454-2227), 6 x 50 mm protective tube, 2.5 m connection lead, silicone, -50 to +180 °C Note: Supply Voltage and Frequency are 12 → 24 Vdc / 24 Vac 50/60 Hz.
Features and Benefits
Microprocessor control Adjustable switching hysteresis Configurable alarm suppression Code-protected parameter level Symbols for temperature unit, minutes and seconds in display Each parameter can be enabled individually for operation Simple mounting Programmable switch-on delay after power ON Electrical connection via screw terminals Size is 76mm x 36 mm
Certifications
cUL approved UL approved ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007