SICK FXL1 Series Safety Controller, 2 Safety Outputs, 24V dc

This safety controller monitors and controls access-locking functions in industrial machinery using RFID-based sensing and power-to-lock operation. Designed for installation with M12 connectors, it delivers diagnostic outputs and self-monitoring semiconductor safety outputs for integration into control cabinets or Flexi Loop systems. The unit is rated for harsh environments with high contamination tolerance and provides defined safe states on fault.

• SIL3-rated performance reduces systemic failure risk
• Category4 safety ensures high-integrity interlock monitoring
• Two PNP semiconductor outputs enable cross-circuit monitoring
• 100mA output current supports common actuator loads
• IP69K protection permits regular high-pressure washdown

• Suitable for machine-guard interlocking in manufacturing lines
• Used with Flexi Loop networks for central diagnostics
• Ideal for safety relay interfacing in control cabinets
• Can be used for monitored locking on access doors
• Used with M12-connected actuators and sensors

It operates from 19.2V DC to 28.8V DC.

LEDs provide status display and a diagnostic indicator for actuator monitoring.

Safety outputs are short-circuit protected PNP semiconductors with ≤100mA output current and application diagnostic output ≤50mA.

At least one safety-related semiconductor output is forced to the OFF state to reach a safe condition.

Rated for -20°C to +55°C ambient temperature with 10%-95% relative humidity at 40°C.