Moflash Industrial ECO LED Beacon - LEDS100 Series
The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing. The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades. This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.
Dual function, flashing or continuous (static) mode Continuously rated LED long life Low current consumption Suitable for surface, conduit box or wall mounting 2 stud fixing 360° light output around the vertical axis Dustproof and weatherproof UV stable polycarbonate lens UV stable ABS plastic base 160 flashes per minute (FPM) IP65 protection RoHS compliant CE Marked
Moflash Amber LED Beacon, 20 to 30V AC/DC, Multiple Light Effects - LEDS100 Series - LEDS100-02-01
Use this LED (light-emitting diode) beacon from Moflash to warn people in your workplace of a hazard. Its LED light has an amber-coloured lens that's used to indicate a change in the environment that requires immediate attention. The beacon has a 360° beam around the vertical axis that spreads in all directions, ensuring visibility throughout the surrounding area. Its low current consumption of 110mA makes it an energy-efficient choice.
Features & Benefits
• IP65 (ingress protection) rating ensures protection against dust and low-pressure water sprays • Wide operating temperature range of -25°C to +55°C for use in demanding environments • Can be surface-mounted or wall-mounted for versatile use • Choice between flashing or continuous light effect via a jumper link on the PCB (printed circuit board) for flexibility
Yes, this beacon is constructed with an ultraviolet (UV) stable polycarbonate lens and an ABS (acrylonitrile butadiene styrene) plastic base, so it won't degrade or fade when exposed to sunlight. This makes it a good choice for outdoor use.
Attribute
Value
Supply Voltage
20 → 30 V ac/dc
Light Effect
Flashing
Lens Colour
Amber
Mounting Style
Surface Mount
Bulb Type
LED
Current Consumption
110mA
Current Type
AC, DC
Base Diameter
72mm
Housing Colour
Black
Lamp Included
Yes
Series
LEDS100
Multifunction
Yes
Height
107mm
IP Rating
IP65
Base Length
33mm
Maximum Temperature
+55°C
Minimum Temperature
-25°C
Special Features
Dust Proof, Low Current Consumption, Water Resistant