Schneider Electric TeSys D LC1D Contactor, 24 V dc Coil, 3-Pole, 80 A, 45 kW, 3NO, 1 kV ac

TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 80A/1000V AC-3/AC-3e (37kW@400V). They can be used to create motor starters for almost any type of application. It provides a 24V DC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), power connection by screw terminals, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHs/Reach). When used with a 480VAC up to 150A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 175A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 7.32 inches deep. It weighs 5.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

• Connection terminals designed to be out of reach of fingers for increased safety
• Wide operating temperature range of -25°C to +50°C for use in demanding industrial environments
• Secure screw terminals for easy installation
• Panel and DIN rail mounting options for versatility
• Mechanical service life of 30,000,000 cycles for long-term performance

• Squirrel cage motors
• Bucket elevators
• Air conditioning units

For optimal performance, you should regularly inspect this contactor's terminals and wipe off any dust or oil. It's also important to check for loose screws and tighten them to prevent sparks that could cause overheating.