Molex, KK 254 Female Crimp Terminal 22AWG 08-50-0113

KK 254 2759 Series crimp terminal contacts are for use with KK 2695 Series housings and KK 5051 Series housings on 22-30 AWG conductors. Suitable for use in a range of applications these connectors are robust and reliable for assurance when used in your design.

2759 Series Crimp Terminal contacts include:
• 670-2263 Hot Tin Dipped, on reel
• 170-7138 Hot Tin Dipped, bulk reel
• 172-9178 Hot Tin Dipped, loose
• 670-2266 Select Gold with Nickel overall, on reel
• 170-7139 Select Gold with Nickel overall, bulk reel
• 678-3149 Select Gold with Nickel overall, loose
• 670-2276 Select Gold with Gold Flash overall, on reel
• 170-7141 Select Gold with Gold Flash overall, bulk reel
• 678-3155 Select Gold with Gold Flash overall, loose

Appropriate tooling for 2759 Series Crimp Terminal contacts:
For Crimp Tool see stock number 663-4246
For Insertion Tool see stock number 710-6528
For Extraction Tool see stock number 173-3278

Terminate your power supply wires with this female crimp terminal from Molex. It's shaped to accept wires sized 0.05 to 0.35mm² and 22 to 30AWG (American Wire Gauge) for installation flexibility. The dual cantilever design creates multiple contact points for a good electrical connection and a metal tang on the head keeps the terminal secured in its connector housing. You'll find devices like this used in high-vibration applications such as dental equipment, gaming machines and automotive devices.

• Wide operating temperate range of 0°C to +75°C for use in demanding environments
• Brass contacts are tin-plated to improve conductivity and ensure corrosion resistance
• Low-halogen material minimises toxic fumes when heated or set on fire to keep you safe
• Comes in a pack of 100 for convenience

• Automotive electronics
• Home security devices
• Medical equipment
• Gaming and vending machines

Using the correct tool for your crimp terminal will help give you a secure connection. Molex's ratchet tool (663-4246) works well with this crimp terminal. Your wire should be clamped firmly in place by the metal contact and insulation crimp sections.