Analog Devices Current Sensing Amplifier Single 8-Pin SOIC
- RS Stock No.:
- 709-7076P
- Mfr. Part No.:
- AD8215YRZ
- Manufacturer:
- Analog Devices
Subtotal 1 unit (supplied in a tube)*
€1.73
(exc. VAT)
€2.13
(inc. VAT)
Last RS stock
- Final 55 unit(s), ready to ship from another location
Units | Per unit |
|---|---|
| 1 + | €1.73 |
*price indicative
- RS Stock No.:
- 709-7076P
- Mfr. Part No.:
- AD8215YRZ
- Manufacturer:
- Analog Devices
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Analog Devices | |
| Product Type | Current Sensing Amplifier | |
| Power Supply Type | Single | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 4.5V | |
| CMRR - Common Mode Rejection Ratio | 80dB | |
| Number of Channels | 1 | |
| Supply Current | 1.3mA | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| GBP - Gain Bandwidth Product | 450kHz | |
| Minimum Operating Temperature | -40°C | |
| Series | AD8215 | |
| Standards/Approvals | No | |
| Length | 5mm | |
| Width | 4 mm | |
| Height | 1.5mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Analog Devices | ||
Product Type Current Sensing Amplifier | ||
Power Supply Type Single | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 4.5V | ||
CMRR - Common Mode Rejection Ratio 80dB | ||
Number of Channels 1 | ||
Supply Current 1.3mA | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 8 | ||
GBP - Gain Bandwidth Product 450kHz | ||
Minimum Operating Temperature -40°C | ||
Series AD8215 | ||
Standards/Approvals No | ||
Length 5mm | ||
Width 4 mm | ||
Height 1.5mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
Current Sensing Amplifiers, Analog Devices
Current Sense Amplifiers accurately amplify small voltages in the presence of large common-mode voltage.
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low Value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.