onsemi NCP12400CBAAB0DR2G 5 PWM Controller, 65 kHz 28V 7-Pin, SOIC
- RS Stock No.:
- 178-4682
- Mfr. Part No.:
- NCP12400CBAAB0DR2G
- Manufacturer:
- onsemi
Subtotal (1 pack of 10 units)*
€2.97
(exc. VAT)
€3.65
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per unit | Per Pack* |
|---|---|---|
| 10 + | €0.297 | €2.97 |
*price indicative
- RS Stock No.:
- 178-4682
- Mfr. Part No.:
- NCP12400CBAAB0DR2G
- Manufacturer:
- onsemi
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | PWM Controller | |
| Maximum Switching Frequency | 65kHz | |
| Zero Power Detection | No | |
| Output Current | 500mA | |
| Mount Type | Surface | |
| Minimum Supply Voltage | -0.3V | |
| Package Type | SOIC | |
| Maximum Supply Voltage | 28V | |
| Topology | Flyback | |
| Pin Count | 7 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Duty Cycle | 85% | |
| PWM Controller Type | Current Mode | |
| Maximum Operating Temperature | 150°C | |
| Series | NCP | |
| Height | 1.5mm | |
| Length | 5mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type PWM Controller | ||
Maximum Switching Frequency 65kHz | ||
Zero Power Detection No | ||
Output Current 500mA | ||
Mount Type Surface | ||
Minimum Supply Voltage -0.3V | ||
Package Type SOIC | ||
Maximum Supply Voltage 28V | ||
Topology Flyback | ||
Pin Count 7 | ||
Minimum Operating Temperature -40°C | ||
Maximum Duty Cycle 85% | ||
PWM Controller Type Current Mode | ||
Maximum Operating Temperature 150°C | ||
Series NCP | ||
Height 1.5mm | ||
Length 5mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The NCP12400 is a new fixed−frequency current−mode controller featuring the Dynamic Self−Supply. This function greatly simplifies the design of the auxiliary supply and the VCC capacitor by activating the internal startup current source to supply the controller during start−up, transients, latch, stand−by etc. This device contains a special HV detector which detects the application unplug from the ac input line and triggers the X2 discharge current. This HV structure allows the brown−out detection as well. It features a timer−based fault detection that ensures the detection of overload and an adjustable compensation to help keep the maximum power independent of the input voltage.
Reduces Overall System Cost and Complexity
Ensures Skip Mode Operation Outside Audible Range
Average Efficiency Meets CoC Tier 2 Compliance
Configurable Protection Tailored for Application Needs