Lumberg Automation Straight Female 3 way M12 to Unterminated Sensor Actuator Cable, 5m

RKT series M12 connectors feature an industry standard 3, 4 or 5 pole female connector, with threaded lock nut and straight configuration. Cord sets are available in a variety of lengths and cable materials to suit a wide range of connector applications and environments. RKT series M12 actuator - sensor connectors are especially suitable for connecting optoelectronic sensors or safety switches typically found on safety door devices, systems and distribution boxes and have an open cable end, which ensures a high degree of wiring flexibility.

Connector body material TPU
Connector IP67 rated when mated
O ring material FKM
Knurled Nut CuZn nickel plated
Contact material CuZn pre-nickeled 0.3 Micron gold plated
Temperature range -25 → +80 ° C

3 pole (4 poles but 1 not connected) cord set are wired (1-4) brown, no colour, blue and black.
4 pole: brown, white, blue and black.
5 pole: brown, white, blue, black, green/yellow.

Transmit data reliably in your control network with this 3-core sensor actuator cable from Belden's Lumberg Automation range. It works in automation setups to carry signals from sensors to the next stage in the system. One end of its 5m length has a female M12 connector, while the other is free, so you can terminate it as needed. A high voltage rating of 250V means this is a suitable choice for use in powerful electrical systems.

• PVC jacket is strong and resistant to abrasion
• Wide operating temperature range between -25°C and +80°C, for use in challenging conditions
• IP67 rating in the locked position for full protection against dust and water up to a depth of 1m

• Safety doors
• Distribution boxes
• Optoelectronic sensors

This unit uses 4A when operating at a temperature of +40°C, so is widely compatible.

3 pole (4 poles but 1 not connected) cord set are wired (1-4) brown, no colour, blue and black.