Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SMC
	Maximum Suction Flow	20L/min
	Product Type	Vacuum Generator
	Maximum Vacuum Pressure	-48kPa
	Nozzle Diameter	0.7mm
	Series	ZH
	Vacuum Port Size	6 mm
	Supply Port Size	6 mm
	Minimum Operating Temperature	-5°C
	Maximum Supply Pressure	0.45MPa
	Maximum Operating Temperature	50°C
	Standards/Approvals	RoHS
	Exhaust Port Size	6 mm

	Select all
	Brand SMC
	Maximum Suction Flow 20L/min
	Product Type Vacuum Generator
	Maximum Vacuum Pressure -48kPa
	Nozzle Diameter 0.7mm
	Series ZH
	Vacuum Port Size 6 mm
	Supply Port Size 6 mm
	Minimum Operating Temperature -5°C
	Maximum Supply Pressure 0.45MPa
	Maximum Operating Temperature 50°C
	Standards/Approvals RoHS
	Exhaust Port Size 6 mm

COO (Country of Origin):: JP

SMC Series ZH Vacuum Generator, 20L/min Maximum Suction Flow, -48kPa Maximum Vacuum Pressure - ZH07DLA-06-06-06

This vacuum generator is a Compact pneumatic ejector designed to create vacuum from a compressed Air supply for industrial pick-and-place and holding tasks. It operates with small-bore one-touch connections and is intended for integration into automation, electronics assembly and mechanical handling systems where lightweight, inline vacuum generation is required.

Features & Benefits

• Nozzle diameter 0.7mm delivers focused suction for small loads
• Maximum vacuum −48 kPa enables secure component grip
• Supply pressure up to 0.45 MPa provides robust vacuum generation
• Supply and vacuum ports Ø6mm allow simple tubing connection
• Flow capacity 20 L/min supports moderate cycle rates
• Operates between −5 °C and 50 °C for typical industrial environments

Applications

• Suitable for pick-and-place of electronic components on assembly lines
• Ideal for vacuum grippers on Compact robotic end-effectors
• Used for holding small parts during inspection or test routines
• Suitable for vacuum supply on pneumatic transfer modules
• Can be used for temporary clamping in mechanical assembly

What tubing types can be connected to the unit?

Soft nylon, nylon or polyurethane tubing are compatible with the one-touch Ø6mm ports.

What exhaust arrangement is provided for noise control?

The boxed body option is supplied without a silencer

a bracket is included where applicable for mounting.

How lightweight is the device for mounting on moving equipment?

The unit has a mass of approximately 0.012 kg, keeping inertia low for dynamic applications.

What is the expected pneumatic input and exhaust interface?

Both the pneumatic supply and exhaust use one-touch fittings sized at Ø6mm for Rapid connection.

SMC Vacuum Generator, 0.7 mm nozzle, -48 kPa 20 L/min, ZH series