Linear Motion

We offer a great range of linear slides, linear guides & positioning tables for any power transmission requirement. We work closely with industry-leading brands like igus, Bosch Rexroth, THK, IKO Nippon Thmpson and NSK so you have an expert selection of cylinder guides, slide assemblies, guide wheels and slewing rings. You can also choose from a full range of accessories including socket tools, T-Nuts and combination plates.

What is power transmission?

Power transmission, or specifically mechanical power transmission in this case, are the components used in an industrial system with moving parts, as opposed to those that are powered by electricity.

What types of mechanical power transmission options are available?

The following types are available:

  • Cylinder Guides: pneumatic devices for generating motion in various ways
  • Linear Guides
  • Assemblies: a load bearing mechanism that also guides the load in a straight line
  • Guide blocks: the carriage that slides along the assembly
  • Rails: the beam along which carriage slides along
  • Linear Slides
  • Assemblies: for precise linear rolling motion along guideways
  • Cap wipers: these lubricate contact surfaces, remove debris and improve operational safety
  • Carriage plates: a flush surface for mounting your components and for attaching t-nuts with grooves for drifting
  • Flange clamps: these enable slides to become self-supporting beams
  • Guide wheels: ball bearing based wheels allowing precision linear motion
  • Slewing rings: these are slow turning rotating rings containing bearings
  • Rails: allow for powered or manual mechanism motion in a linear direction
  • T-Nuts: these secure fixings for your components
  • Track Rollers: these are concentric and eccentric adjusting roller wheels for a spacer slide
  • Adapter Bushings: are used for mounting guide wheels, in concentric and eccentric varieties
  • Positioning Cables
  • Clamping strips: used for attaching existing and additional equipment
  • Combination plates: are securing attachments which can be drilled
  • Angles: for 45° and 90° angular component clamping
Flat Cage Assemblies
Flat Cage Assemblies
Guide Wheels
Guide Wheels
Linear Bearing Units
Linear Bearing Units
Linear Bearings
Linear Bearings
Linear Guide Blocks
Linear Guide Blocks
Linear Guide Rails
Linear Guide Rails
Linear Guides
Linear Guides
Linear Shaft Supports
Linear Shaft Supports
Linear Shafts
Linear Shafts
Linear Slide Accessories
Linear Slide Accessories
Linear Slide Rails
Linear Slide Rails
Linear Slides
Linear Slides
Positioning Tables
Positioning Tables
Slewing Rings
Slewing Rings

2157 Products showing for Linear Motion

Sort by
1 of 108
In Stock
Bosch Rexroth 400 mm Long Steel Closed Bush Shaft, 8 mm Shaft Diam., Hardness 60 HRC, h6 Tolerance
  • RS Stock No. 724-3392
  • Mfr. Part No. R100000800,400mm
Subtotal (1 unit)
€14.72(exc. VAT)
€14.72/unit
In Stock
IKO Nippon Thompson Guide Block MLG20C1HS2 ML Series, 8.51 kN Dynamic Load
  • RS Stock No. 199-9789
  • Mfr. Part No. MLG20C1HS2
Subtotal (1 unit)
€81.03(exc. VAT)
€81.03/unit
In Stock
Bosch Rexroth R065822530 Bearing with 35 mm OD
  • RS Stock No. 409-482
  • Mfr. Part No. R065822530
Subtotal (1 unit)
€66.74(exc. VAT)
€66.74/unit
Temporarily out of stock
Igus W Series, WS-20-80-600, Linear Guide Rail 74 mm width 600 mm Length
  • RS Stock No. 667-1355
  • Mfr. Part No. WS-20-80-600
Subtotal (1 unit)
€119.71(exc. VAT)
€119.71/unit
Currently unavailable
HepcoMotion W1X Guide Wheel with 19.55 mm OD
  • RS Stock No. 259-0094
  • Mfr. Part No. W1X
Subtotal (1 unit)
€38.58(exc. VAT)
€38.58/unit
Temporarily out of stock
Fischer Elektronik FS Series, FS 6/100, Linear Guide Rail 6 mm width 100 mm Length
  • RS Stock No. 577-587
  • Mfr. Part No. FS 6/100
Subtotal (100 units, in packs of 100)
€166.51(exc. VAT)
€166.51/pack
In Stock
INA Linear Shaft Support 2-Bolt Base Linear Ball Bearing Block 50 mm, GW20 20 mm 60 mm
  • RS Stock No. 172-1197
  • Mfr. Part No. GW20
Subtotal (1 unit)
€32.56(exc. VAT)
€32.56/unit
In Stock
THK Linear Guide Carriage SR15W1SS(GK) SR Series, 9.51 kN Dynamic Load
  • RS Stock No. 729-9989
  • Mfr. Part No. SR15W1SS(GK)
Subtotal (1 unit)
€117.17(exc. VAT)
€117.17/unit
In Stock
IKO Nippon Thompson Linear Guide Carriage MLF24C1HS2 ML Series, 4.31 kN Dynamic Load
  • RS Stock No. 175-3644
  • Mfr. Part No. MLF24C1HS2
Subtotal (1 unit)
€90.47(exc. VAT)
€90.47/unit
Stocked by manufacturer
Rose+Krieger Positioning Table FNA1246TA0304, 215 N
  • RS Stock No. 373-8045
  • Mfr. Part No. FNA1246TA0304
Subtotal (1 unit)
€604.93(exc. VAT)
€604.93/unit
In Stock
Bosch Rexroth 500 mm Long Steel Closed Bush Shaft, 5 mm Shaft Diam., Hardness 60 HRC, h6 Tolerance
  • RS Stock No. 724-3380
  • Mfr. Part No. R100000500,500mm
Subtotal (1 unit)
€17.47(exc. VAT)
€17.47/unit
In Stock
Igus Slewing Ring with 80 mm OD
  • RS Stock No. 778-2695
  • Mfr. Part No. PRT-01-20
Subtotal (1 unit)
€185.17(exc. VAT)
€185.17/unit
Stocked by manufacturer
THK SR15 Series, SR15-520L(GK), Linear Guide Rail 15 mm width 520 mm Length
  • RS Stock No. 619-954
  • Mfr. Part No. SR15-520L(GK)
Subtotal (1 unit)
€101.53(exc. VAT)
€101.53/unit
In Stock
Bosch Rexroth R065821640 Bearing with 24 mm OD
  • RS Stock No. 409-476
  • Mfr. Part No. R065821640
Subtotal (1 unit)
€23.10(exc. VAT)
€23.10/unit
In Stock
Ewellix Makers in Motion 1 m Long Steel Closed Bush Shaft, 20 mm Shaft Diam., Hardness 64 HRC, h6 Tolerance
  • RS Stock No. 285-0396
  • Mfr. Part No. LJM20X1000ESSC2
Subtotal (1 unit)
€60.90(exc. VAT)
€60.90/unit
In Stock
ABB 109 mm Long Supported Shaft, 6 mm Shaft Diam.
  • RS Stock No. 289-1575
  • Mfr. Part No. 1SCA101652R1001
Subtotal (1 unit)
€2.04(exc. VAT)
€2.04/unit
In Stock
NSK Linear Guide LH100120ANK1B01PN1, LH
  • RS Stock No. 497-9411
  • Mfr. Part No. LH100120ANK1B01PN1
Subtotal (1 unit)
€121.55(exc. VAT)
€121.55/unit
In Stock
Accuride, DZ0305-0024 Drawer Slide, 610 mm Stroke Length
  • RS Stock No. 184-6059
  • Mfr. Part No. DZ0305-0024
Subtotal (1 pair)
€184.09(exc. VAT)
€184.09/pair
In Stock
RS PRO Guide Block HGH Series, 27.1 kN Dynamic Load
  • RS Stock No. 360-825
Subtotal (1 unit)
€114.69(exc. VAT)
€114.69/unit
In Stock
THK Linear Guide Carriage SRS15MUU(GK) SRS Series, 6.66 kN Dynamic Load
  • RS Stock No. 217-5242
  • Mfr. Part No. SRS15MUU(GK)
Subtotal (1 unit)
€75.52(exc. VAT)
€75.52/unit
1
2
3
108
Results per page

Related links