Bearing Pullers

When compounds that are held together by their own frictional forces need to be separated, you will need to reach for a set of pullers or separators in order to pull them apart. At RS Components, we have a varied range of reliable pullers, separators and extraction tools, as well as insertion tools and puller accessories.


What types of Pullers are there?


There are several types of pullers available, including mechanical pullers, bearing pullers, hydraulic pullers, strong back pullers, and heavy-duty jaw pullers, all of which you can find here with RS Components.


Mechanical pullers are used to replace the bearing, pulley couplings or other parts that fit together in a similarly close fashion without having to dismantle machinery or remove the running shaft. There are three-arm or two-arm versions, with three arms providing better load distribution and a concentric pulling action and two-arms suitable for confined spaces.


Bearing pullers are specifically-designed tools for removing or installing bearings from rotating machine shafts or from blind bearing holes. Dependent on the size of the puller, the application can vary dramatically, ranging from the transmission to complicated industry machinery.


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring-operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user-friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


...
Read more Read less

Filters

Viewing 21 - 40 of 92 products
Results per page
Description Price Capacity Puller Type Hydraulic Force Operation Number of Pieces For Use With Jaw Reach
RS Stock No. 737-2826
Mfr. Part No.71161001
BrandSTAHLWILLE
€77.21
Each
units
- Bearing Puller - Gear - - -
RS Stock No. 845-8359
Mfr. Part No.TMMP 2X170
BrandSKF
€123.14
Each
units
170.0 mm Bearing Puller 2.0t Hand - - -
RS Stock No. 847-8243
Mfr. Part No.1656996
BrandGedore
€50.48
Each
units
50.0 mm Bearing Puller - Lever Press - - -
RS Stock No. 612-5694
Mfr. Part No.TMMD100
BrandSKF
€705.22
Each
units
10 → 100 mm Bearing Puller - Hand 22 - -
RS Stock No. 737-2822
Mfr. Part No.71160010
BrandSTAHLWILLE
€73.26
Each
units
12.0 mm Bearing Puller - Gear - - -
RS Stock No. 124-8431
Mfr. Part No.TMHP10E
BrandSKF
€717.16
Each
units
- Bearing Puller - Hydraulic 15 - -
RS Stock No. 845-8356
Mfr. Part No.TMMP 2X65
BrandSKF
€63.77
Each
units
65.0 mm Bearing Puller 0.7t Lever Press - - -
RS Stock No. 190-601
Mfr. Part No.TMHC 110 E
BrandSKF
€1,032.53
1 Kit
Kit(s)
- Bearing Puller 11.2t Hydraulic - - -
RS Stock No. 845-8353
Mfr. Part No.TMMP 3X185
BrandSKF
€164.50
Each
units
185.0 mm Bearing Puller 2.7t Hand - - -
RS Stock No. 124-8437
Mfr. Part No.TMIP30-60
BrandSKF
€571.59
Each
units
30 → 60 mm Bearing Puller - Gear 2 - -
RS Stock No. 300-6231
Mfr. Part No.U.302
BrandFacom
€89.12
Each
units
80.0 mm Bearing Puller - Gear - - -
RS Stock No. 300-6247
Mfr. Part No.U.35
BrandFacom
€131.13
Each
units
15 → 75 mm Bearing Puller - Gear - - -
RS Stock No. 611-4098
Mfr. Part No.U.301M
BrandFacom
€136.25
Each
units
100 mm - - - - Slide Hammer Tips 100mm
RS Stock No. 885-5322
Mfr. Part No.729101/400MPA
BrandSKF
€4,441.36
Each
units
200.0 cm³ Bearing Puller 400.0MPa Hand - - -
RS Stock No. 737-2835
Mfr. Part No.71050010
BrandSTAHLWILLE
€119.55
Each
units
22.0 mm Bearing Puller - Hand - - -
RS Stock No. 732-4785
Mfr. Part No.TMMX 350
BrandSKF
€61.30
Each
units
- Protection Blanket - - - - -
RS Stock No. 237-748
Mfr. Part No.GEDORE 9.00/2
BrandGedore
€704.39
1 Kit
Kit(s)
- Bearing Puller 10.0N Hydraulic - - -
RS Stock No. 847-8234
Mfr. Part No.1657089
BrandGedore
€51.93
Each
units
70.0 mm Bearing Puller - Lever Press - - -
RS Stock No. 300-6219
Mfr. Part No.U.14L
BrandFacom
€54.26
Each
units
45.0 mm Bearing Puller - Hand - - -
RS Stock No. 122-2296
Mfr. Part No.BHP2751G
BrandEnerpac
€4,478.49
Each
units
- Bearing Puller 20.0t Hydraulic - - -
Related Products
2 Leg puller with quick release hooks Safe ...
Description:
2 Leg puller with quick release hooks Safe and quick removal of pulleys, wheels, ball bearings etc Strong drop forged pattern Reversible hooks for internal or external pulling Spindle can be changed for a hydraulic spindle Maximum spread: 160mm, reach: ...
The TMHS 100 hydraulic spindle from SKF generates ...
Description:
The TMHS 100 hydraulic spindle from SKF generates a high pulling force with only a small amount of effort Unlike standard mechanical spindles, they can dismount bearings in in a reduced time. The cylinder, pump and spindle are fully integrated ...
Introducing the series of professional Wide 2/3 Leg ...
Description:
Introducing the series of professional Wide 2/3 Leg Bearing Pullers from Facom These compact pullers have been designed with the most demanding application in mind and made from the highest quality materials to ensure safety and high performance. A simple ...
Introducing the series of professional Wide 2/3 Leg ...
Description:
Introducing the series of professional Wide 2/3 Leg Bearing Pullers from Facom These compact pullers have been designed with the most demanding application in mind and made from the highest quality materials to ensure safety and high performance. A simple ...