Schneider Electric Contactor Reversing Block for use with TeSys U Series, 230 V, 440 V, 500 V, 690 V

Allows non reversing Power Bases to be converted to have reversing operation

Mounts directly below a Power base without any modification
LU2M type does not have screw connections

Slide your equipment into reverse gear with this contactor reversing block from Schneider Electric. It works with a motor starter to change the rotation direction of your motor, giving you enhanced control over your system. Thanks to its built-in mechanical interlock, the device prevents a motor from driving in both directions at once to cut down on the risk of burnout. As it simply plugs into a motor starter, you can install it in no time. A current rating of 38A means this block can power through motor reversal in high-current systems.

• Low current consumption of 120mA for energy efficiency
• Quick operating time between 75 and 150ms for rapid-fire switching
• Screw clamp terminals to secure wiring against vibrations
• Compact measurements of 80 (H) x 45 (W) x 105mm (D) for installation in tight spaces

• Material handling
• Packing plants
• Construction sites

Yes, this reversing block has a wide operating temperature range between -25°C and +60°C, so it's a safe bet for harsh industrial conditions.

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option