Energizer Button Battery, 1.55 V, 7.9 mm Diameter
- RS Stock No.:
- 683-358
- Mfr. Part No.:
- 7638900052909
- Manufacturer:
- Energizer
Subtotal (1 pack of 10 units)*
€19.67
(exc. VAT)
€24.19
(inc. VAT)
In Stock
- 70 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Pack(s) | Per Pack | Per unit* |
|---|---|---|
| 1 + | €19.67 | €1.967 |
*price indicative
- RS Stock No.:
- 683-358
- Mfr. Part No.:
- 7638900052909
- Manufacturer:
- Energizer
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Energizer | |
| Product Type | Button Battery | |
| Chemistry | Silver Oxide | |
| Nominal Voltage | 1.55V | |
| Battery Capacity | 39mAh | |
| Diameter | 7.9mm | |
| Termination Type | Flat Contact | |
| Weight | 580mg | |
| Standards/Approvals | No | |
| Height | 2.8mm | |
| Select all | ||
|---|---|---|
Brand Energizer | ||
Product Type Button Battery | ||
Chemistry Silver Oxide | ||
Nominal Voltage 1.55V | ||
Battery Capacity 39mAh | ||
Diameter 7.9mm | ||
Termination Type Flat Contact | ||
Weight 580mg | ||
Standards/Approvals No | ||
Height 2.8mm | ||
RoHS Status: Exempt
- COO (Country of Origin):
- JP
Energizer Button Battery, 7.9mm Diameter, 1.55V Nominal Voltage - 7638900052909
This button battery is a low-profile silver oxide cell designed to deliver stable 1.55V power for small electronic devices that require continuous low-drain operation. It is intended for applications where compact, lightweight energy sources are necessary and provides consistent voltage under typical ambient conditions.
Features and Benefits:
• 39mAh capacity for extended low-current operation
• 55-65Ω impedance at 40Hz for predictable discharge behaviour
• 1.2V load cut-off supporting defined end-of-service point
• 0.58g mass minimises added weight in miniature devices
• Continuous drain tested on 22KΩ at 21°C demonstrating practical performance
• 55-65Ω impedance at 40Hz for predictable discharge behaviour
• 1.2V load cut-off supporting defined end-of-service point
• 0.58g mass minimises added weight in miniature devices
• Continuous drain tested on 22KΩ at 21°C demonstrating practical performance
Applications
• Suitable for wristwatches requiring silver oxide chemistry
• Used with small medical instruments needing steady low drain
• Ideal for Compact measuring instruments and sensors
• Can be used for key fobs and small remote controls
• Replacement 7.9mm button cell for precision timing devices
• Used with small medical instruments needing steady low drain
• Ideal for Compact measuring instruments and sensors
• Can be used for key fobs and small remote controls
• Replacement 7.9mm button cell for precision timing devices
What is the typical test condition used to determine capacity?
Capacity is measured to 1.2V using a continuous 22KΩ load at 21°C.
How does temperature affect operating service?
Service varies with temperature, discharge performance declines at lower temperatures and increases at higher temperatures relative to 21°C.
What is the electrical behaviour during typical use?
The cell shows a near-constant 1.55V nominal voltage with gradual decline towards a 1.2V cut-off under continuous low-drain conditions.
What construction details influence internal resistance?
The combination of gel anode, cathode mix and separator yields an impedance in the 55-65Ω range at 40Hz.
How much internal volume does the cell occupy?
The typical volume is approximately 0.15cm3.
Related links
- Energizer Button Battery 7.9 mm Diameter
- Varta Button Battery 7.9 mm Diameter
- RS PRO Button Battery 7.9 mm Diameter, 5 Pack
- Panasonic SR41 Button Battery 7.9 mm Diameter
- Energizer Button Battery 9.5 mm Diameter
- Energizer Button Battery 11.6 mm Diameter
- Energizer Button Battery 6.8 mm Diameter
- Energizer 337 Button Battery 4.8 mm Diameter