Microchip ATMEGA48PA-AU, 8 bit AVR, ATMEGA48PA Microcontroller, 20 MHz, 4kB FLASH, 32-Pin TQFP

Bulk discount available

Subtotal (1 pack of 5 units)*

€7.98

(exc. VAT)

€9.815

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 640 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
Per Pack*
5 - 20€1.596€7.98
25 - 95€1.546€7.73
100 +€1.492€7.46

*price indicative

Packaging Options:
RS Stock No.:
131-0302
Mfr. Part No.:
ATMEGA48PA-AU
Manufacturer:
Microchip
Find similar products by selecting one or more attributes.
Select all

Brand

Microchip

Family Name

ATmega48PA

Package Type

TQFP

Mounting Type

Surface Mount

Pin Count

32

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

4 kB

Maximum Frequency

20MHz

RAM Size

512 B

USB Channels

0

Number of PWM Units

1

Number of SPI Channels

2

Number of I2C Channels

1

Number of UART Channels

1

Typical Operating Supply Voltage

1.8 → 5.5 V

Number of CAN Channels

0

Number of USART Channels

1

Number of Ethernet Channels

0

Instruction Set Architecture

RISC

Number of PCI Channels

0

Maximum Number of Ethernet Channels

0

Width

7.1mm

ADCs

8 x 10 bit

Number of LIN Channels

0

Dimensions

7.1 x 7.1 x 1.05mm

Number of ADC Units

1

Pulse Width Modulation

1 (6 Channel)

Height

1.05mm

Maximum Operating Temperature

+85 °C

Length

7.1mm

Program Memory Type

Flash

Minimum Operating Temperature

-40 °C

The Microchip ATmega48PA CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It operates on 2.7V to 5.5V voltage range. The AVR core combines a rich instruction set with 32 general purpose working registers. It features 4Kbytes of in-system programmable flash with read-while-write capabilities, 256bytes EEPROM, 512 bytes SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible Timer/Counters with compare modes, internal and external interrupts, a serial programmable USART, a byte-oriented 2-wire serial interface, an SPI serial port, a 8-channel 10-bit ADC, a programmable watchdog timer with internal oscillator, and five software selectable power saving modes. The idle mode stops the CPU while allowing the SRAM, Timer/Counters, USART, 2-wire serial interface, SPI port, and interrupt system to continue functioning. The power-down mode saves the register contents but freezes the oscillator, disabling all other chip functions until the next interrupt or hardware reset.

Up to 16MIPS throughput at 16MHz

On-chip 2-cycle multiplier

Programming lock for software security

Two 8-bit Timer/Counters with separate prescaler and compare mode

One 16-bit Timer/Counter with separate prescaler, compare mode, and capture mode

Real time counter with separate oscillator

Master/slave SPI serial interface

Byte-oriented 2-wire serial interface

Programmable watchdog timer with separate on-chip oscillator

On-chip analog comparator

Interrupt and wake-up on pin change

Power-on reset and programmable brown-out detection

Internal calibrated oscillator

External and internal interrupt sources

32-lead TQFP package

Related links