Hex keys, commonly known as Allen keys/wrenches in the UK and various other countries, are a very simple hand tool of the general spanner and socket family, used for tightening and loosening hexagonal bolts and other compatible fasteners. Hex keys are most often encountered as a single piece of steel formed into a small L-shape, although there are a number of variations on this basic format available to buy from many different manufacturers and suppliers.

Hex keys or Allen wrenches are basic and highly versatile fastening/driving tools, which is largely why they’re so very widely used across an extensive array of applications and product categories today. Most professional or hobbyist DIY enthusiasts - indeed, anyone who owns a reasonably well-stocked toolbox of any kind - will more than likely have a few different sizes of hex keys (or possibly even complete hex key sets) knocking around in it somewhere.

In fact, their use is now so widespread that the inclusion of a free hex key with flat-pack furniture, bicycles and other products requiring quick straightforward assembly is now an extremely common practice (although, unsurprisingly, the quality of such giveaway tools is often very questionable). A solid, high quality hex wrench or Allen key set will potentially last many years and prove useful time and time again, whereas lower-grade ‘freebie’ tools are much more likely to be severely limited in both their adaptability to other tasks and overall longevity in frequent use.

In this guide, we’ll look at some of the basic types of hex keys available to buy on the current market, as well as assessing the relative pros and cons of each, and offering a few pointers towards best practice when it comes to successful hex key sizing choices and uses.

The main issue to be aware of when shopping for Allen keys and hex wrenches, aside from overall manufacturing quality, is to buy the correct size of hex key for the task at hand. Most popular brands and reliable suppliers will be able to provide you with a hex key sizing chart, either included on the product packaging or at the point of sale.

While these manufacturer specifications should always be your first port of call when choosing a hex wrench product for a particular job, there is a good degree of standardisation across the full range of available Allen keys and their similar variants from other countries of origin.

For the most part, you’ll be able to rely on near-universal compatibility without too many concerns, as long as you’re using a true ‘hex’ head fastener (i.e. a six-sided recess - as opposed to, say, a square-head bolt) with a hexagonal key or driver.

Of course, the full range of hex bolt sizes you could potentially need to tackle is very broad indeed, and more expensive hex key sets come with more options for ensuring you’ve always got the right sized tool for the job. However, even the most budget Allen key sets will usually incorporate a basic array of options for fitting all the most popular hex head socket sizes - these tend to include some or all of:

As we’ve already touched on - and as most people would already have been well aware - the short and sweet answer here is that hex keys are just a simple hand tool system for tightening and loosening certain types of bolts and screws. Specifically, they’re intended for use on bolts with a recessed hex drive socket, meaning a hexagonal ‘slot’ in the screw head (or sometimes the shaft, in the case of headless fasteners).

Hex keys have a number of important characteristics that make them particularly well suited to the straightforward, user-friendly fastening role that has made them so popular among operators of all experience levels. These include the fact that hex keys:

• Are simply constructed and fairly robust
• Are cheap to manufacture and buy
• Are uncomplicated to use
• Are lightweight and easy to hold/manipulate, even in relatively tight spaces
• Provide six contact surfaces between the hex key and the hex head bolt, for improved torque and less chance of slipping/stripping
• Are available in a range of lengths and gauges, for gradually increased torque
• Are suitable for use with headless fasteners
• Are typically double-ended, thus offering a ‘spare’ hex driver in case of damage or rounding to one end of the tool
• Can quite easily be reconditioned or renewed by simply trimming off any damaged ends with a suitable cutting disc or grinder, due to the hexagonal profile running the full length of the tool in most cases

Using them is remarkably simple - you just insert one end of the driver into the recessed hexagonal fastener head, and apply torque at the other end to turn it. Typically, you’d use the shorter of the hex key’s two shanks as the handle, giving the tool a longer reach and increased manoeuvrability in smaller spaces. However, the longer shank can also be used as the ‘handle’ when more torque is required, provided the work area allows enough room to turn a longer-handled tool in.

However, while the basic applications and qualities of Allen key sets don’t vary that much from brand to brand and product to product, there is a bit of potential variety in exactly how to use a hex key properly, depending on which type and format of tool you decide to buy.

In the following section, we’ll look more closely at some of the best value options among the numerous styles of hex wrenches you’ll commonly find on sale, and discuss some of the potential pros and cons of each type.

Although there’s always some potential for confusion wherever two different terms are used for the same item, in this case it’s pretty straightforward - to all practical intents and purposes, hex keys/wrenches and Allen keys are indeed essentially the same thing. So why do we even have two widely used names for one very simple type of hand tool?

As you might well have predicted already, the name ‘Allen’ when attached to these basic wrenches is actually a registered trademark, whereas the term ‘hex key’ is the generic version - although in casual use, the distinction between the two has become almost entirely blurred over time. In this regard, it’s very like the uses of terms such as ‘Hoover’ and ‘vacuum cleaner’, or any number of similar examples where a popular registered trademarked name has bled over into common use as a generic label.

It’s also worth noting that you’ll occasionally find hex wrenches being referred to as ‘hex head’ keys or similar. While most people will know exactly what’s meant by this, there’s some potential for confusion here too: industry standards dictate that the term ‘hex head’ is far more commonly used in reference to driven parts (i.e. screws and other fasteners) than to the driver itself, and thus would seldom be applied to the actual hex key by most professional users.

The registered Allen key name originated in the US sometime around 1910, when the the Allen Manufacturing Company based in Connecticut first secured the trademark.

Industrial historians seem to agree that hex socket screw drives were probably conceived rather earlier than this - likely sometime in the mid-to-late 1800s - but that it wasn’t until the early 20th century that hex head fasteners started being produced in any great numbers. Although the race to bring various different drive sockets to the mass market was already well underway by 1900, it was William G. Allen of the titular Allen Manufacturing Company who first managed to patent a method of cold-forming screw heads around a hexagonal die.

He successfully marketed these new products as ‘safety screws’, due in part to their ability to be machined without protruding heads (a potential source of snagging and subsequent worker injury). As such, they were rapidly adopted by all manner of industrial plants and production lines; at the time, factories around the globe were seeking to modernise and improve on their often patchy safety records under rapidly increasing workloads, and innovations such as headless screws were another small step in the right direction.

However, if the widespread embracing of this new standard spread quickly throughout the industrial world, it wasn’t until the onset of WWII that hex drive screws and wrenches - be they trademarked Allen originals, or any number of similar duplicate designs that popped up around the same time - really began to gain traction on the domestic market.

The unprecedented production and commercial boom that the 1940s and 1950s brought with them saw the reliable and cheap hex key emerge as an increasingly common feature across a broad swathe of consumer products and DIY assembly kits. To this day, the hex socket/hex key combination remains extremely familiar to customers around the globe, and it’s now known by a variety of names depending on which companies were chiefly responsible for popularising the standard on their own domestic markets.

The name ‘Allen’, for example, is widely used in Spain as well as the US, while in Italy you’re more likely to find a hex key being called a ‘brugola’ (after Officine Egidio Brugola), or an ‘INBUS’ in Germany (an acronym derived from the well-known Bauer & Schaurte company).